Need some help from an 1125 (R or CR) owner

[50dro]

Would one of you 1125 owners be so kind as to measure the bore and depth to the axle end around the rear axle on both sides as shown below? I've designed some axle sliders for my XB that I'm selling on here and would like for the design to accomodate the 1125's as well if possible.

http://z.about.com/d/motorcycles/1/0/B/6/-/-/1125RRtSwingarm_KW.jpg

Thank you in advance!!

[GMan1125R]

If I remember tomorrow Ill bring some calipers from work. What measurements do you want, diameter depth, . . . ?

[50dro]

I need the bore diameter and depth to the axle end around the rear axle on both sides. Basically, I need to know the max dimensions of a slider to fit in the recessed area of the swingarm (both sides). From what I have gathered, the XB's and the 1125's share the same axle so I won't need any axle dimensions.

Thanks for the help!

[xtremelow]

PM, RT Performance he will measure it for you