D&D????

Buellxb Forum

Help Support Buellxb Forum:

Shane

Well-known member
Joined
Oct 25, 2009
Messages
81
i want one for my 2010 xb9sx! can i run it without a ecm alter or fuel map?

i just want to throw it on and go...

any help?
 
Shane go to American Sport bike they have a review. Yo most likely would be better off with a drummer. It follows the stock fuel curve pretty well. Not as loud though. I warn you the D7D is VERY loud and has gotten my friend pulled over.
 
I have had a D&D on my 0812r for well over a year. I just put it on with no tuning and it ran fine. The throttle was a little sluggish but everything was fine once the rpms got to 3k. I have since had it dyno tuned and the throttle response is much better.
dyno0812r2.jpg
 
Yes throw it on and go the new ecm have a learning function. You have to go for like 15 minutes above 3,000 RPM's for the ecm to learn. Fishgutz on this site had the open air conversion and a hawk performance exhaust on his 09 xb12; put it on the dyno and had a ideal f/a ratio. Just look up hawk performance exhaust to see for yourself.
 
ive been running my 04 12r for 4,000 miles now all stock with only a D&D and have had no issues
 
Back
Top