barker exhaust

[popeye13433]

hey guys im looking at getting the barker exhaust does any one have pics of it in black? i have seen a few but all are with the brushed aluminum. RT i believe you were one of the first to get one but yours is brushed aluminum also correct?

[Mike Van V]

Ah yes....gotta get that highest power output of what ever syndrome...

Sorry...no disrespect...but had to say it..!

Mike

[popeye13433]

in all honesty i listened to all the exhausts for the 1125 and i liked the sound of that one the best behind the kenda rt3 but with the price of the barker it was easier to sell the wife on.

[d_adams]

The Barker pipe is a little quieter than most of the KEDA-Design systems and they're all higher priced. Mine start out at $549 and go up to $899, but they're custom made to order.

I went ahead and figured it out. The Barker is about $25.50/hp and mine start out at about $32.25/hp based on a 17 hp gain over stock.

[RT Performance]

Nice adams would have never thought to do that math :).

yes i have one it is brushed alm with polished inlet pipe.
http://www.buellxb.com/buell_images/3929_20100405115532_L.jpg
still love this pipe and glad to see how well it faired in the Dyno test.
here is a link to a discounted price and should be some black ones in there.
http://www.buelletinboard.com/forums/showthread.php?t=13430
do yourself a huge favor get the EBR barker tuned computer and do them at the same time.

[d_adams]

The Drummer is $58.53/hp. :-)

[RT Performance]

the dnd $99/ -1 hp???
i know it didn't fair well and omg is it loud so happy i didn't do it

[popeye13433]

d_adams i will admit that i do like the looks and sound of your pipes. but with the economy and the fact that in order for me to get the bike and exhaust i had to bite the bullet and get my wife a boob job (man did i loose on that deal):D price was really the deciding factor and Tim is based in Michigan so why not help out the hometown economy. my absolute favorite would be your RT-2 i think the dual chamber outlet that is just bad a$$ but at 6+ is out of my price range

RT thanks for the photo there are some pix on ebay from puzzled's ebay store

[popeye13433]

UPS tracking says it should be here today. hopefully it will show up before i leave for work

[RT Performance]

sweet i am sure you will love it :)

[popeye13433]

got her installed too me long enough i was swamped with work couldn't get a free min to take care of it. umm trying to figure out how to add photos up in a min

[mad]

[popeye13433]

http://www.buellxb.com/buell_images/6739_20100806072834_L.jpg

and the final product

http://www.buellxb.com/buell_images/6739_20100806072846_L.jpg

i have a sound clip working on getting that up

[GMan1125R]

I just ordered the Barker exhaust and the EBR ECM to go with it, that has got to be the cheapest horsepower I've ever bought. I already have the K&N and the Denoid resistor waiting, Im going to do it all at the same time.

Has anybody done a dyno with Barker, ECM, and K&N?

[GMan1125R]

Washed both bikes today and got the Barker exhaust on the Buell. Man the stock exhaust was a PITA to get off, heavy as hell too, felt like cast iron. Ha Ha
I dont have the ECM or K&N installed yet, Ill do those later this week when the ECM gets here. Figured out the Sportster battery wasnt dead, just a bad connection at the starter relay, man I feel dumb about that one. Oh well time to put some miles on it or sell it.
Anyone in the market for an 883?

[theshinenz]

Can someone PM me regarding the special for forum members, I am keen on a Barker with black powdercoating, and also want a price for an extra repacking pillow and estimate on ceramic coating, plus shipping to Australia,4510

Cheers
Scott
[email protected]

[Bossanova]

Can someone PM me regarding the special for forum members, I am keen on a Barker with black powdercoating, and also want a price for an extra repacking pillow and estimate on ceramic coating, plus shipping to Australia,4510

Cheers
Scott
[email protected]
Barker Info (http://www.buellxb.com/Buells-for-Sale/Buell-Parts-for-Sale/Buell-Aftermarket-Parts/Barker-1125-Slip-On-Exhaust)

emailed info too..

[tyler]

im sure that pipe works well but it needs to be hidden by a belly pan /chin spoiler i think it doesen't flow with the lines of the bike(sorry)

[theshinenz]

Thanks, I've got a bellypan in mind also so will be ordering that as soon as the bike turns up.

[RT Performance]

There's a great buy on a black barker and ebr ECM. On bad web.
Black pipe and ecm 475
http://www.badweatherbikers.com/buell/messages/21/653952.html?1318348296

[RT Performance]

http://www.buellxb.com/buell_images/3929_20110713131721_L.jpg
wow what a differance a year makes bike doesn't even look the same.
Ps repack kits (pillow and 3 rivets ) are just 20 bucks plus shipping i bought 2.
I painted the spring since then

[Bossanova]

http://www.buellxb.com/buell_images/5956_20101230072639_L.jpg

im sure that pipe works well but it needs to be hidden by a belly pan /chin spoiler i think it doesen't flow with the lines of the bike[confused]

[tyler]

i like the tires

[RT Performance]

I think he means the front pipe sticks out without the fairings.
it is important for flow and crash reason's

[theshinenz]

I'v emailed the guy from the deal on the barkers on Badweb and also emailed barkers direct with no reply, I wanted to buy a barker exhaust for the deal price, didnt think it would be that difficult.

[RT Performance]

If your going to buy new pm puzzled here.
Barker is a small business but great poeple

[tyler]

I want a hpe but that's why i bought the poor man's ducati... I love the way my bike looks but they should have built them with 150 at the wheel from the start..