cutting down front fairing and windscreen?

[mar67655]

whats the best wat to cut down the front fairing and windscreen i figure a dremel what tool did you use i like the way extremes if you used a dremmel what bit worked best any info is appreciated

[brightbuell]

I was into the idea a while back so good luck and i want to see pics please step by step if you can please.:D:D

[twoguns]

i used a dremel with small cutting disc. made a cardboard template to get the sides even and tehn masked the line to cut.

mine though is a fair bit lower than xtremes and is narrowed as well...

http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG_2276.jpg

http://i90.photobucket.com/albums/k270/mr2guns/oompa/06062010675.jpg

http://i90.photobucket.com/albums/k270/mr2guns/oompa/Oompahtail1.jpg

[Riderdie]

Dremel with a plastic cutting wheel. Made my line with painters tape. Then sand the edges smooth.

I've cut down a few it's really not that hard. Just remember you can always take some more off but you can't put it back on.

Here's the 3 that I've done.
http://www.buellxb.com/buell_images/6655_20100721150653_L.jpg

http://i1228.photobucket.com/albums/ee457/jride003/9339862e.jpg

http://www.buellxb.com/buell_images/6655_20101206120050_L.jpg

[Riderdie]

Two guns you got any close up pics of that race pipe clearing the pulley tensionser.

Did you have to persuade the pipe a little?

Put mine on when I first picked up the ss and still had the s, sounded awesome but didn't clear the tensioner.