ECM stock conversion Help

[MotoX6]

When I load my stock map and race map in notepad to convert the values to the stock, they read like this and do not show up the exact same way that the video does. Any solution?

http://www.buellxb.com/buell_images/8990_20110317062947_L.jpg

[MotoX6]

btw my fireware BUECB050 and thats a BUECB060 race map. will that work also

[Livers]

Yes you can burn the CB060 race into the CB050 stocker.

[kyle_dewald]

You aren't modifying the msq file you are modifying the txt file

[Livers]

You aren't modifying the msq file you are modifying the txt file

I hope he isn't tuning with Notepad :D

He doesn't need to know about any msq file for what he is trying to do, does he?

[kyle_dewald]

^^ yes, he is trying to copy the maps and timing from the race eeprom to his stock eeprom so he can burn it. To do this you copy the values from the race msq to the stock msq

[MotoX6]

Haha notepad. But ya I was trying to copy values in .msq format. Only problem was the text file or msq file comes up like in my picture instead of like in the buellmod video so I dunno which values to copy in this view. I appreciate the help!

[Livers]

OK, I went and watched the video. The method demonstrated Is necessary because of the differing firmwares, IB310 vs GB231. If MotoX6 is really using a CB050, burn the entire CB060 EEPROM package and be done with it. These, AFAIK, are the only ECMs you can cross burn in this way. I've done it and know it works.

Go back and watch the video again, noting where they are loading the race EEPROM and saving the maps. That generates the MSQ and should look like the video shows. And good luck with the copy/paste action.

[MotoX6]

Ok. If I burn the whole 60 EEPROM is it reversible? Can I reburn the stock one later if need be?

[Livers]

Yep, reversible. If you aren't comfortable with the idea, play with the maps only.