Expanding Tool Collection

landinr · Mar 17, 2011

Ok so heres the deal, I have the basic tools to work on the bike with ie. sockets wrenches ect.
Now I am planning on expanding with a few more tools for my collection, anyone have any suggestions on anything they might have used or bought that will help me out. For example, I do not have any torque wrenches so which should I look towards for purchase any specific brand that works best or has worked best for you?
Also any other specialty tools that make the job easier that you can think of?

Riderdie · Mar 17, 2011

Havnt used many diff brands but torque wrenches are one of those things where you get what you pay for.

No point in buying a cheap one or even a crazy expensive electronic one. Just spend good money on a self adjustable one, keep it oiled and it will last for ever.

konarider94 · Mar 17, 2011

im happy with my craftsman torque wrench. its a microtorque model or something like that. clearly its no snapon but im not using it everyday.

d_adams · Mar 17, 2011

Depends on what you want to spend it on really. A full bike lift would be my next big purchase. I've already got most of the stuff I need, front and rear stands, tire changer, air compressor, grinders, sanders, etc. I have a 2 car garage that barely fits 2 bikes now.

Jobe Zeebuh · Mar 17, 2011

Torque wrenches are good. Plenty of t-27 bits are a plus. Also get a 5/8th spark plug socket. An 8 inch extension, and a swivel bit for spark plug changes. Get a set of sae sockets and sae gear wrenches it you really what to get fancy. Also locktite thread sealant and high temp gasket sealant are good things to have on hand. I carry around a plug kit for my tire to. Never know when you can run over a screw.

anrkizm95 · Mar 17, 2011

for those that dont know always zero out your torque wrench when done.

Jobe Zeebuh · Mar 17, 2011

Also get some deep sae sockets If you want to do your own exhaust work.

popeye13433 · Mar 17, 2011

most manufactures of torque wrenches will offer some sort of calibration program for you if you get to using it more often. as an aircraft mechanic i need mine calibrated every year. craftsman works just as good as any of my coworkers snap-on for about half the cost

YJBoomer · Mar 17, 2011

Craftsman or Kolbalt are good torque wrenches. You don't need a hi-end tool to get the job done. Unless your using it everday of your life. Plus craftsman & kolbalt will replace broke tools. Me, if there is something I need, it give me excuse to go oggle over the tools for an hour and then buy a new tool. Ahhh, that new tool smell.

TooFst · Mar 17, 2011

I like the T handle wrenches in Allen and torx. that's my next investment.

popeye13433 · Mar 17, 2011

i suggest you all join the craftsman club if you are looking at tool discounts. you can get pretty good deals if you watch their member only sales. last month i got 200 buck worth of tools for 80

landinr · Mar 18, 2011

thanks for all the input

xtremelow · Mar 18, 2011

for those that dont know always zero out your torque wrench when done.

My torque wrench holders, only allow them to fit in with the wrench dialed back to 0[up] Good call for those who may not have a holder.

I would say make sure you get a ft/lbs and in/lbs.

Off subject a little but Also make sure you check the specified specs when tightening down items, it is very easy to mix them up. Like our header pipe is torqued to 72-96 in/lbs which is only 6-8 ft/lbs.

popeye13433 · Mar 19, 2011

if you dont get both the conversion is easy multiply of divide by 12 you can save a bundle by only getting what you need

IYAOYAS · Mar 19, 2011

Precision Instruments is a good torque wrench, they make all your hi end hi profile names. I would recomend a split beam, they are easy to adjust and do not require you to zero them when done. You can watch ebay and find them for a good price. NO ONE will replace your torque wrench when it is damaged. They will rebuild the head but the working end, the part that makes it a "torque" wrench is not warrented beyound 12 months and that is only for calibration. I would recommend against a torque wrench that has a plastic adjusting handle and lock collar. Just my 2 pennies

popeye13433 · Mar 19, 2011

I would recommend against a torque wrench that has a plastic adjusting handle and lock collar. Just my 2 pennies

+1 [up]

Expanding Tool Collection

Help Support Buellxb Forum:

landinr

Well-known member

Riderdie

Well-known member

konarider94

Well-known member

d_adams

Super Moderator

Jobe Zeebuh

Well-known member

anrkizm95

Well-known member

Jobe Zeebuh

Well-known member

popeye13433

Well-known member

YJBoomer

Well-known member

TooFst

Well-known member

popeye13433

Well-known member

landinr

Well-known member

xtremelow

Well-known member

popeye13433

Well-known member

IYAOYAS

Well-known member

popeye13433

Well-known member

Similar threads

Latest posts