just performed the breather re-route ( thanks to all the guys that did write ups and posts on the DIY, it would not have gotten done without them.) i think i have it right, i will post some pics as soon as i can get them loaded, my only concern is the way the hose is routed seems a little close to the front spark plug. should this be a concern?
breather re-route
- Thread starter ocroft
- Start date
Help Support Buellxb Forum:
Stevenc150
Well-known member
- Joined
- Aug 12, 2008
- Messages
- 5,144
Pics first so we get a better idea.
Stevenc150
Well-known member
- Joined
- Aug 12, 2008
- Messages
- 5,144
I was worried about the heat so I took mine back towards the tail behind the rearset - as long as you don't think it'll melt the hose.
- Joined
- Feb 24, 2010
- Messages
- 7,344
If you switch the tubes coming off the motor it fits better for the way you have it routed.
- Joined
- Feb 24, 2010
- Messages
- 7,344
But yours looks fine, that was the way I did mine I have had mine routed the same as yours down by the oil cooler and no problems with heat for over a year.
Jobe Zeebuh
Well-known member
- Joined
- Dec 12, 2010
- Messages
- 1,528
Looks like you need a new front tire bro. Be careful in the wet.
http://superbikesupply.com/
Call them...they had the best prices. They quoted me 235 shipped for front and rear pilot powers (not 2ct) with a 190 rear.
Call them...they had the best prices. They quoted me 235 shipped for front and rear pilot powers (not 2ct) with a 190 rear.
Similar threads
