View Full Version : XB12SCG tail section on a Firebolt
texasroadranger
04-17-2011, 12:08 PM
Can someone tell me if a scg lightning tail will fit on a firebolt? I have a 2008 lightning tail and was gonna put on 2008 firebolt. Can it be done?
twoguns
04-17-2011, 12:20 PM
if you are talking about the seat rails and rear light shroud... then YES, these will fit your firebolt.
its jsut a bolt up process with exception of the brake reseviour, and a little fiddling fitting the latch cable (if you dont swap it) and you need the metal latch bracket as well.
xtremelow
04-17-2011, 01:23 PM
http://www.buellxb.com/buell_images/520_20100502224749_L.jpg
jakestolar
04-17-2011, 01:43 PM
God I LOVE THAT!!! I want that tail for my firebolt. Anyone want to sell one?!
texasroadranger
04-17-2011, 04:25 PM
Ok great guys thanks for info.
http://www.buellxb.com/buell_images/4491_20101003132621_L.jpg
http://www.buellxb.com/buell_images/4491_20101003132604_L.jpg
A couple pix of my bike. SCG seat, with a chopped tail. Everything bolts right on, you'll need to do a little wiring for the taillight and make a bracket for the brake reservoir.
upthemaiden
04-17-2011, 04:54 PM
Glade's bike is still one of my all time favorites. Sometime I definitely want go try out a firebolt fairing on my lightning.
http://i286.photobucket.com/albums/ll112/streetassassin213/2011-01-23_13-31-42_654.jpg
onelogue
04-17-2011, 09:07 PM
I also am a huge fan of the lightning tail on a firebolt! Looks awesome!
jeepin79
04-18-2011, 03:14 AM
I have a Firebolt and would love to put a lightning tail on it if anyone is interested in swapping.
jakestolar
04-18-2011, 05:46 AM
can you still have passenger pegs?
gtp3800
04-18-2011, 06:07 AM
yea the pegs bolt on to the bottom of the lightning side rails
andymnelson
04-18-2011, 06:57 AM
But whhhyyyy????? :p
freak2180
04-18-2011, 07:37 AM
Because it looks bad ass.
andymnelson
04-18-2011, 08:58 AM
I never understood the look. It looks like 2 different bikes mashed into 1. It's not that it looks bad, it just looks dis-jointed and unnatural.
jakestolar
04-18-2011, 10:36 AM
i Love it. It is unique and so ugly that it turns me on
texasroadranger
04-19-2011, 02:55 AM
Im in the works of possibly buying a firebolt. I was gonna put an scg tail on my 1125r but its becoming way too much work. Plus, Im gonna get a bike for wife and we saw this one and she likes it.
twoguns
04-19-2011, 11:55 AM
well i was only going to say it can be done, but as you all put up soem pics... i gotta pic oompah again. :D
http://i90.photobucket.com/albums/k270/mr2guns/oompa/06062010674.jpg
texasroadranger
04-19-2011, 06:28 PM
thats sweet[up]
jakestolar
04-20-2011, 11:46 AM
How did everyone find their tail section? Do all years work?
twoguns
04-20-2011, 12:05 PM
all model S frames fit. i bought one set from Buell. bought another previous from private sale. just bought another set today.
jakestolar
04-20-2011, 12:15 PM
Holy crap! Want to sell one of those 3 sets?!
texasroadranger
04-20-2011, 02:31 PM
I have complete setup orderted from HD but im gonna sell it for what i paid plus whatever shipping will cost me, if interested. I think everything was around $600 and i have all receipts.
jakestolar
04-21-2011, 06:37 PM
Texas,
I am not trying to be a dick by any means. But if you are trying to get what you paid plus actual shipping wouldnt I be losing? I could go to the dealer and buy new and would still come out on top, no?
kyle_dewald
04-21-2011, 06:55 PM
http://www.buellxb.com/buell_images/5130_20110421155448_L.jpg
texasroadranger
04-21-2011, 08:25 PM
I know ur not a dick jake by all means. Some may want it and some may not. I figured I would put it out there though.
DustyXB
04-21-2011, 08:41 PM
I totally want. :(
poppinsexz
04-22-2011, 04:03 AM
Buellsterparts.net had the frame rails 125 each i believe
texasroadranger
04-22-2011, 04:34 AM
yep, that sounds right on 125 each. Really its not much work at all. As a matter of fact, I found a 2008 firebolt for sale here in TX im gonna go look at today. He wants $8k but KBB said value around $5900. I may offer $6K but we will see. Ya'll wish me luck...
87ttop
04-22-2011, 06:50 AM
WOW, just bought an xb12s red/amber in color, and I love this look, they look like mini rocket ships. I want firebolt front faring kit and all white farings!
Bolty
04-22-2011, 09:40 AM
Kyle your bike looks good, are you going to chop the tail?
texasroadranger
04-22-2011, 05:38 PM
This 12r i saw had white fairings and was nice but not $8k or even $6k nice.
kyle_dewald
04-22-2011, 06:15 PM
I plan to do the chop, but couldn't wait to ride so it will wait for now.
jakestolar
05-20-2011, 03:37 AM
Looks like I found a complete tail assembly off and 04 xb12s. Being an 04 and my bike is an 09 any bolt on issues?
kyle_dewald
05-20-2011, 03:55 AM
Shouldn't be any at all, as long as it's an S model and not an Ss
jerseymayhem
05-20-2011, 03:57 AM
I think this is the best look for the firebolt. Really sets it apart from the plastic clad I4's when in a parking lot.
Took me a long time to collect the parts for mine, at one point i had 3 of the left rails, and nothing else.
http://www.buellxb.com/buell_images/6122_20110422151103_L.jpg
jakestolar
05-20-2011, 04:02 AM
Awesome, I am ecstatic. It is almost everything complete to include seat for $200! I have been collecting parts for awhile now. Looks Like I have some extras to sell
mailtoome
05-20-2011, 08:25 AM
http://www.buellxb.com/buell_images/8020_20110319002348_L.jpg
2004xb12s
05-20-2011, 08:54 AM
i Love it. It is unique and so ugly that it turns me on
haha :D:D
jakestolar
05-20-2011, 09:07 AM
It's like the fat chick someone needs to bring her home!
Couple more questions. I need to paint the new sub frame to match the frame and some road rash on my bike. How do I find out the specific color? (09 XB12R white/blue) I see ASB has some rattle can paint (for $25?!?!?!) Is that sufficient? I dont want my bike to look like a turd, mind you.
Also is there any way to tag a thread on this forum w/ out posting on it? I see a lot of great theads that I would like to reference to once I get home. But when I try and find them at a later date, I never can?
Thanks for the imput as always!
beaterbaja
05-20-2011, 09:26 AM
Any of you guys have a pic of under the seat, how you arranged it all? I'd appreciate it, I just got the setup off a 05 city x. Thanks!
jakestolar
05-20-2011, 10:57 AM
from what I understand we will have a ton of room all we need to put in is the battery. Where as the lightnings have all the electronics under the seat instead of the front fender
texasroadranger
05-27-2011, 05:49 PM
hey guys, i have the 1125r-cr with the xb tail swap complete and should have pics in next few days. she looks sweeet with all the carbon fiber and xb tail. Its a chic magnet for sure....
jakestolar
05-28-2011, 03:32 PM
Its a chic magnet for sure....
Take her easy, If she is that easy take her twice!
buellbradski
05-28-2011, 03:50 PM
i put a add on craigs list and two weeks later a guy called me we swaped tails every thing bolted up 3 hours later i had thishttp://www.buellxb.com/buell_images/9498_20110525084035_L.jpg
jakestolar
05-29-2011, 03:43 AM
Looks great!
Kuntreeboy
05-29-2011, 04:21 AM
I cant wait to get mine!!! It's goona look sweet!
freak2180
05-29-2011, 04:34 AM
Jerseymayhem..........You just had to go and post a pic of a Yellow Bolt with the tail swap.
Now I got the itch like a crackhead lookin for a fix.
http://www.buellxb.com/buell_images/6326_20101119035311_L.jpg
I think its time to trim some fat off this ass.
http://www.buellxb.com/buell_images/6326_20101119034851_L.jpg
Question is.......what seat should a taller rider look for ....Im 6'2 ? I like the look with the tail lift better than with out....so I guess im huntting them down also.
skyroket
05-29-2011, 04:59 AM
I'm 6'2" 230 lbs and have an S tail and seat on my R. Rides just fine and I still don't look like a bear in a circus.
I will see if I can get a pic of me on it.
jakestolar
05-29-2011, 07:12 AM
do you have the low seat?
texasroadranger
05-29-2011, 07:12 AM
http://www.buellxb.com/buell_images/6538_20110528144526_L.jpghttp://www.buellxb.com/buell_images/6538_20110528144618_L.jpghttp://www.buellxb.com/buell_images/6538_20110528144449_L.jpghttp://www.buellxb.com/buell_images/6538_20110528144339_L.jpg
These are pics of my 2008 Buell 1125R-CR conversion with the XB12SCG tail conversion and complete carbon fiber kit.
bobaganoosh
05-29-2011, 07:16 AM
that looks awesome man. any plans to try to remove the pods?
skyroket
05-29-2011, 09:58 AM
6'2" 230
S seat (I don't think it's from an SCG - how do I tell?)
http://i.imgur.com/9KV0i.jpg
http://i.imgur.com/MfnnK.jpg
(Yes, this is Glade's old bike)
bobaganoosh
05-29-2011, 11:47 AM
s and scg subframes are the same just different seats and suspension
texasroadranger
05-29-2011, 12:12 PM
pods r needed to keep bike cool. it water and air cooled. it usually runs 190-200 degrees all the time. pods help it stay cool.
rb70383
05-29-2011, 11:56 PM
Skyrocket, Bike looks good. Did you do the rear hidden caliper? Just starting to research that mod. Also I like the white wheels on it. Mine is white as well. [up]
skyroket
05-30-2011, 05:04 AM
Nope. Glade (http://www.buellxb.com/Buells-for-Sale/Buell-Firebolts-for-Sale/2003-XB9RS...Lots-of-mods---Colorado) did all the mods you see, then I bought it from him back in...April? I put stock(ish) mirrors back on and frame pucks, passenger pegs, flipped the front tire, cleaned up some electrical. It is a badass bike and I know he misses it.
texasroadranger
05-30-2011, 06:32 AM
nice bike sky.... I was looking at maybe finding a 12r to have an xtra bike but my lil project turned into a nightmare and now that its complete, ive lost interest in any more bikes,lol. I think this one now is more than enough.
jakestolar
06-12-2011, 11:05 AM
Does anyone ever have someone ride on the back w/ the tail lift?
Hammer
06-12-2011, 01:43 PM
Opposite side of coin.
http://www.buellxb.com/buell_images/8060_20110612104300_L.jpg
twoguns
06-12-2011, 02:46 PM
i have been collecting sets of panels...
this was oompah last month,
http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG00651-20110514-0614.jpg
http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG00652-20110514-0614.jpg
and here is oompah in a fresh look (for this week anyway)
http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG00673-20110609-1622.jpg
http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG00672-20110609-1458.jpg
buellbradski
06-12-2011, 03:39 PM
Oompahs one badass bolt
jakestolar
06-12-2011, 03:48 PM
Looks Like I unintentionally brought that thread back w/ out my question being answered.
Does anyone have their girl ride B*tch w/ the sub frame spacers installed?
twoguns
06-18-2011, 10:03 PM
oompah once more today.
http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG00686-20110619-1143.jpg
http://i90.photobucket.com/albums/k270/mr2guns/oompa/IMG00689-20110619-1424.jpg
texasroadranger
05-28-2012, 05:21 PM
xb lightning tail up for grabs, make me a reasonable offer and its yours
twoguns
05-28-2012, 10:05 PM
tell me mate. pm if you like.
texasroadranger
05-29-2012, 02:56 AM
twoguns, i sent ya a pm
jscmoto46
03-09-2014, 08:57 PM
Anyone looking to do this conversion?? I have an 03 lightning & I am looking to put a firebolt tailsection on my lightning. It will be a bit roomier for two up riding for me n the missus.
jedijoe
03-13-2014, 06:47 PM
Jsc. I just purchased an xb with a firebolt tail and wabt to put an xb tail on it. I.will.trade.you. only problem is i am out of the country till june
jscmoto46
03-21-2014, 04:04 AM
Thanks for the reply jedijoe, but kinda got somethin in the works.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.