• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Buell Techlusion TFI Controller Input

Buellxb Forum

Help Support Buellxb Forum:

mjp5318

Well-known member
Joined
May 15, 2011
Messages
169
Buell Techlusion TFI Controller

Found this for sale, I dont know if this would be beneficial or not if the ecm has already been remapped ?

Would it be beneficial if the ecm was stock and use this ?

Please let me know , thank you very much .. Mike
 
If you had a CBR/Yamaha/etc..I would say go for it. Yes I have put many on here in the shop. And the Customer was pleased with it, mostly the big bikes. The Buells have a much different Ecm setup. You can use add on fuel packs power commander/Daytona Twin tec, and Vance & Hines & so on.Yes I'm gulity of having one on MY 06-rvt1000 RC 51 Honda ,the power commander for the New Sato Exhaust was the Best option and cost as well for two k&Ns air filters & the exhaust add on.The Ecm or Delphi system on the Buells is like Night and day.The Buells have a preset Maping and Epromm that is used for our Bikes.Erik Buell Racing .com has an ECM for a very reasonable price just make sure to explain what you have changed on the Bike.Like the exact exhaust /Air filter etc.. [Custom Tunning] is a good option as well but will take a little time to get it set up and the ECM Spy program is a good way to go. This is a powerful Tuner Tool and not to be taken lightly.You can Brick (ruin NOT FIXABLE) the Ecm, if you don't pay attention to details.A custom tune is a great option for a [Stock] Ecm .If you just want to plug it in DO a TPS-Throttle position Sensor, reset and Ride the EBR Ecm is your best bet.You can always pop that on and Then buy the cable for [learning] the Ecm Spy program, for your Stock Ecm.Don't USE the SPY program on Eriks Ecm. ECM SPY also has a diagnostics program included. Check(Xoptiinside.com) and read up on it. You need a Cable you can buy there-and the drivers are free and ECM Spy downloaded to your Desk top computer a Laptop is easier for mobility. I have found that Windows XP seems to be popular/ better for Spy/ & diagnostics.Windows 7 works as well. You can also check out American Sport Bike .com as well for parts for your Bike. In case your Harley Dealer is far away OR not Buell Friendly.Good luck with your decision , and Welcome to the Forum.*Jimi:D
 
Back
Top