PDA

View Full Version : engine swap



thuren67
09-09-2011, 05:34 PM
Is it possible to install a xb12s engine in a xb9s? Everything but the oil lines look the same. Is the wiring harness the same?
Thanks

ATFIII
09-10-2011, 04:05 AM
I do believe that they are slightly different, but I will leave it to the Xperts we have here on BuellXB!

burgurboy
09-10-2011, 05:22 AM
possible? yes.

I think it's more dependent on the year though...

for ex: it may be easier to swap an '06 (12) into an '04 (9) than swapping an '08 (12) into an 07 (12).

This is just an example, as they made some pretty big changes to the bikes in '08.

It's definitely possible. you may be able to find more info on "TheOtherForum" *ahem*. This topic has been discussed several times over there. but, they again, that forum (badweb) is dang near impossible to search.

Good luck!

wolfo68
09-10-2011, 06:38 AM
it's possible, ask rrh or give me about a week before I start tinkering on my 9 and do comparisons

give us an idea of what years your thinking about swapping. also be aware that if you do this you might have a lot of hassle to register it depending on the state

rrh481
09-10-2011, 08:09 AM
If you do an 08 you need the new throttle body, possibly swingarm depending if you have the newer one or not. ECM, wiring harness, voltage regulator, oil cooler.

If you go with the 07 an earlier just the engine new ECM and the 12 throttle body.
So for the money do an 07 xb12 or earlier.

rrh481
09-10-2011, 08:10 AM
Oh and with the 08 you need the 08 throttle cables.

thuren67
09-10-2011, 12:37 PM
Thank you for all the answers guys.

The 9 is a 03, the 12 Is a 04....

So complete engine and throttle body and ecm And I'm golden?

rrh481
09-10-2011, 07:07 PM
Yes sir

rrh481
09-10-2011, 07:13 PM
Let me correct myself. Right now if you own a 04 or newer and your gonna put the 04 swap in it yes just the motor throttle body and ECM but if you go with the 03 your gonna have to change the front sprocket to the 04 and up. Do you get what I'm saying?

thuren67
09-10-2011, 07:24 PM
So if I have a complete engine, sprocket and all it will swap easy. Think of it like this I have 2 complete bikes, if so I have everything to swap??
Thanks

rrh481
09-11-2011, 04:24 PM
Yup you'll be fine then.

njdevils1990
09-11-2011, 04:41 PM
youll need the 04 belt and rear sprocket too correct? i mean it may not be 100% necessary but it would pro long the life of the belt to buy an 04 if you dont have it with the new engine

rrh481
09-11-2011, 05:04 PM
I already told him he needed the sprockets