Woodcraft brake & shifter levers

[Baal]

Can anyone confirm whether these work on the stock rearsets? Meaning do they bolt right up like the Knight and Precision Engineering ones do? Woodcraft says not, but it seems like I've seen them on someone's bike. All help appreciated!

[xtreme]

nope, gotta have the woodcraft rearsets. well worth the money

[jakestolar]

I am almost 100% sure yes.
The shift lever is a definate yes as long as you don't use the GP Shift pattern.
The Brake uses a metal bushing and the same bolt as before.

So now that I have typed this, yup they will!

[xtreme]

Your right, if you use the correct bushings.

[Baal]

Do you use the OE bushings, or do you have to order the Woodcraft equivalent?

Thanks so much for the help.

[jakestolar]

Woodcraft specific is what I recommend. I can post a link to em if you need it.

However (comma) If you pull the ones off you brake and shifter lever they will fit into the woodcrafts and work. But for the extra $16 you would spend on the proper bushings it is well worth it. I have one bushing that is woodcraft and one that is factory. THE WOODCRAFTS ARE SOOOOOOOO MUCH BETTER. Nice and tight (not sloppy but moves freely) The buell bushings are a bit sloppy in the woodcraft pedals.

Kinda rambled but Hope it helps

[Baal]

It do. [up]