View Full Version : need rear red reflector
user_deleted
10-06-2011, 01:57 AM
i just bought a 2007 Uly and has pair of red reflectors on back. one is cracked and needs replaced. it measures approx. 2-3/4 inches by 1-1/4 inches. i looked at the reflector on the back of my lightning with stock tail and appears to be the same size. i think it's generic and used on all models. anybody have a spare from a tail chop job that they could send my way? happy to pay freight or whatever. thanks as always for any help. you can email me or PM me and i'll give you address and payment if any needed.
[email protected]
thrstrmech
10-06-2011, 09:54 AM
LSHD1.com.......$1.76
P/N: 59259-90 Reflector, Red
user_deleted
10-06-2011, 02:55 PM
thanks much. i'll go pick one up.
user_deleted
10-06-2011, 02:57 PM
crap!!! minimum order is $25. thanks anyway
victormonopoly
10-06-2011, 03:21 PM
I have the left and right ones that are below the turn signals, and the very back one below the license plate. All off of my 12s, so you don't need the bracket that the side ones are on but if you can get the reflector itself off, it's all yours. All three if you want.
BuellyBagger
10-06-2011, 03:32 PM
i got the stick on ones(same size) that come taped and ready to go with the outdoorsman side case set. u pay shipping
thrstrmech
10-06-2011, 07:01 PM
sorry lunatic...forgot about the minimum, that got me once before too, so I go to surdyke.com, kutterharleydavidson.com, or latusharleydavidson.com, don't ASB carries it, maybe ironmachine.com may have it. anyway, you now have the part number, good luck
sak1782
10-06-2011, 07:19 PM
post up a picture. I have a few from some part lots ive been buying up. dont know if its the same for the STT and the ULY, but if so, Ill just send ya one.
Call it paying it forward :)
user_deleted
10-07-2011, 03:26 AM
thanks very much one and all. either victormonopoly or buellybagger could send me an email would be great. i just need one red one. if it is attached to anything doesn't matter. they all stick on and i'll peel it off. again, it is about 1/4 inch thick, 2-3/4 inches wide and 1-1/4 inches high. i think the side ones, one under license plate, ones on bags are all the same but above are the approx. measurements. please send me mail and i'll pay whatever ship costs are. thanks again for the help. mail:
[email protected]
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.