View Full Version : cr wheels
nczo6
10-16-2011, 08:52 AM
Is it possible to run cr wheels on a xb i know the brake and sprocket are on opposite sides but can you just swap them are to the correct side on the xb ?
Miami78
10-16-2011, 09:10 AM
Yes. If the rear has a tire on it you'll need to pull the tire off and flip it as well so it's spinning in the correct direction after you flip the rear wheel.
jakestolar
10-16-2011, 09:11 AM
I am pretty sure they are the exact same
anrkizm95
10-16-2011, 09:11 AM
Yes. If the rear has a tire on it you'll need to pull the tire off and flip it as well so it's spinning in the correct direction after you flip the rear wheel. [up]
nczo6
10-16-2011, 09:21 AM
cool thanks guys
JOEL9
10-16-2011, 10:01 AM
if you get a 2010 cr/r rear wheel you will need to get a new axel. the 2010 rears are 3-bearing wheels. they have the axeL or the whole 3- bearing rear wheel kit at EBR.
nczo6
10-16-2011, 10:18 AM
the ones i got are off a 2009 so hopefully i wont need that kit
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.