Finaly got my graphics (Matter decals)

[matter]

Here are a few picture of my Lightning, made some graphics for the frame and did some airbrush work to the chin fairing and airbox. I've also bead blasted the chrome handlebars so they don't look like they were stolen off an old Schwinn. I made some air deflectors from stainless to keep the heat off my legs. Check out my Big'un exhaust mod. My muffler mod is different than any I have seen, I removed the stock outlet and pipe that connects to the middle pipe. Then I made a loop to connect the two outer pipes so they no longer use the rear chamber. Then I put a 3 1/2" stainless with a inside curled edge outlet in the hole where the original outlet was, only longer and angled up and to the rear. So now it is louder with a nice tone as the rear chamber works like a collector chamber for the outer tube loop, and when the interactive valve opens it dumps the center tube to the collector chamber also. Sounds different than any I have heard with a "badass restrained on a leash" kind of sound, and when the interactive valve opens it deepens the tone.

Matt


http://www.buellxb.com/buell_images/2032_20080904143713_L.jpg
http://www.buellxb.com/buell_images/2032_20080904142855_L.jpg
http://www.buellxb.com/buell_images/2032_20080904144555_L.jpg
http://www.buellxb.com/buell_images/2032_20080904145344_L.jpg

[FIDOSOL]

Wicked..

[bad juju]

Sweet!

[Trooper]

That is sweet. Nice job on the air brushing. The pipe is nice to love the look of big outlets.

[Sayjackb]

How did you secure those heat sheilds? Can you post a close up if you get a chance?

[Devlsmurf]

That is really freakin cool!

[matter]

Thanks to all, zoom in on the shields if you can or I can try to get a closer shot. So far they are just stuck in place with a bit of rtv too see how they worked. Now that they have worked excellent, (almost no heat) I will mount them nicer when I pull the seat stays for paint.

Matt

[joshs74nova]

Freaking outstanding!!![up]

[buell007]

I at a loss for words so [up][up][up][up][up][up][up][up][up][up][up][up]

[buell007]

and I want a set

[matter]

buell007 ,I'm in Moses Lake ya know. Which way are you going on your Leavenworth ride?

Matt

[buell007]

yes on the 20th ill email you

[09XB12Ss]

Amazing paint job. Love how you used the translucent covers to make it so wild.

[GatorBuell]

Thats very cool.

[XBear9S]

I have to say that's really is nice! [up]

I always liked the clear plastics but thought it a bit too cheesy.
What you did with the ghost flames under the plastic is genius.
Took that bike to a whole 'nother level!
Very impressed.

I got a friend I'm gonna show this to.
He may just trade in his CF when he sees it...

Again,
Great job!!

Robtk! a.k.a. "Special K"


"The tugs on your leash may seem kind or seem cruel;
But the difference is moot to a hard-ridden Buell;
For laws are but chains and it's easy to see;
That only the Outlaw Bueller can ever truly be free!"
--Sam "this is gonna" HurtBuelly

[Odin]

That does look pretty sweet. I'm really liking the big Pegasus on both sides!

[2StangBK]

Nice creative touches for sure!

[Trooper]

Did you do the air brushing your self?

[matter]

I did, that was kind of a quickie, I have been custom painting as a hobby for over 30 years. Right now I am doing a full "over the top" paint job on an '08 Hayabusa with 14 miles on it. Fun stuff for sure!

Matt

[Thaloc]

So the pegasus on the frame is air brushed? Man that is really great looking! Im over in Wenatchee, would you be willing and what would you charge to do that to my frame? Maybe in white or blue?

[dave_xb12r]

It was a .ai file. Matt did a great job fitting it to the frame! Matt did you save that stretched .ai file? or was that done by whoever printed it? If you saved it, could you email it to me?

[matter]

Actually, the Pegasus graphic is a vinyl decal I made. I manipulated the .ai file I got from dave xb12r over a .jpg photo of the bike and cut it on my vinyl cutting plotter. I could make more and in any color you like, even chrome! They are hi-performance vinyl and would have a backing just like any professional graphic.

Matt

[dave_xb12r]

Matt that is awesome! Maybe you could arrange creating them in a few different colors and selling them here at Buellparts.net

[matter]

dave xb, e-mail me your address and color choice and I will send you a set for evaluation. No charge, of course! [cool]

Matt

[matter]

watch your maibox dave, sent on thursday. post a pict. of your results!

Matt

[dave_xb12r]

Yay! I got them in the mail yesterday while I was on a ride and slapped them on today thanks to Matt's awesome instructions! Thanks Matt!

http://www.buellxb.com/buell_images/1832_20080921190628_L.jpg
http://www.buellxb.com/buell_images/1832_20080921190653_L.jpg

[matter]

Wow Dave, great job on the install! Looks awesome!

Matt

[bajabomber87]

Those are sick stickers! are these going to be available to anyone else?

[speedracingluda]

I need a pair of those in my life now! I love it! please email me and let me know. [email protected]
Thanks!

[matter]

Thanks to all who are interested, I am trying to work out the logistics as time allows.

Matt

[loser54023]

I'd love a set in yellow for myxb9r. Those things are so cool. Sweeeeeeeeeeeet

[Yev]

Damn, I love the red flames!
Great job dude.

[FIDOSOL]

That Vinyl rocks man, maybe you could post a pic of them in different colors (methinks photoshop for now) so we can see what they'd look like?

BTW I have an 07 CityX Translucid Hero Blue and I want that on my bike, how much?

[email protected]

[matter]

I will try to get some of this figured out this weekend, I have too many irons in the fire! (as usual...)

Matt

[chuckanut]

:D Sounds like you might get a little busy!!

[balls_out]

Hey man, how much for a set like you have, i'd love a set of satin or flat black ones like u have on ur frame, they are sweet! [email protected] thanks!

[Shlorty]

That is damn impressive!!! Matt you could make a killing on those. I am down in Tri Citties and would love to take a look at that stuff in person. What city are you in? Here is a pic of mine for all to critique. What would you charge for a set in like a Kawasaki green?

[Shlorty]

http://www.buellxb.com/buell_images/1516_20080617203605_L.jpg

[Stevenc150]

Where's your pic [confused]

[CityXer]

Thats the Badddddddddest>> The Sticker is awsome also![up][cool]

[matter]

Ok, I am thinking $50.00 a pair for the vinyl frame graphics, and that will include shipping to the lower 48. I will also donate 10% of each set back to this board.
This will be for any color you like and I will look into other options like fades, chrome, and diamond plate vinyl. I only use the best vinyl available and the vinyl I use is name brand like Scotch or Gerber and is hi performance cast vinyl and not the cheaper calandered vinyl some use. It will not fade or peel and should last the life of the bike, but can be easily removed with a heat gun if you want to make a change. I am working on some other designs also and will post them as soon as I get a chance. I will try to accommodate any needs or desires anyone wants.
You can e-mail me at [email protected].

Thanks, Matt

[matter]

Shlorty, I am in Moses Lake.

[Shlorty]

I would like to come see some of what you've done, maybe interester in a bit of custom paint myself. Its a pretty short ride there from here, let me know if you have some time, and would allow me to come and take a look and talk at ya. Thanks in advance.

[CBREDXB12s]

Thats awesome! Love the paint on the airbox!

[matter]

Thanks! I will post a picture or two on this forum of the Hayabusa I am painting right now a soon as I get it done. I could post a picture or two of some other stuff too if you give me an idea of what you like.

Matt

[FIDOSOL]

Okay matter I have a question about a custom vinyl...

http://www.buellxb.com/buell_images/1642_20080928174942_L.jpg

Sort of the theme of my life it is the Greek spelling of Chaos, I used grey as a background color because The Frame is a light grey color. I would like for it to be blue, I was wondering if you would be able to do this and if so how much would it cost? Vinyl for each side of the bike. I won't be able to get them for a month or two but would like to know if you'd be interested in doing this.

[eubanks]

WOW. yeah. that bike looks incredible matt.

and it does look like you could get some business out of these vinyls... looks good on that big empty frame. how will i know when u have some more designs worked out?

[matter]

FIDOSOL, sure I could work that into a graphic for you. It could be in blue over a matte black Pegasus graphic, or it could be a cut out in the Pegasus or just about anything. I will try to work on a few ideas for you as soon as I get a chance.

eubanks, I will post some pictures here as soon as I get some things rolling.

Matt

[FIDOSOL]

Matter you're gentleman and a scholar. Thanks man can't wait. I admire those with talent, I look at how useless some people are and then there are people like you, and also, anyone ever gotten really close to a service dog? Like for handicapped people and blind folks and what not? THAT is a freakin' animal right there, that's a real dog... Sorry about losing track of stuff I guess.

[matter]

Update, I am working with my vinyl supplier to get a better price, hopefully I will be able to offer the graphics cheaper. We'll see when I hear back and find out what quantity I have to buy.

Matt

[matter]

Finally got the 'Busa done, now I can spend a little yime with the graphic project!

Matt

http://www.buellxb.com/Buell-XB-Forum/Users-Bikes/Finished-Painting-The-Hayabusa-Pictures-I-Said-I-Would-Post.

[climberfreak]

o i have to get me some of those stickers

please share :D [email protected]

[matter]

OK, looks like I can sell the basic color graphic for $37.00 shipped. By basic colors I mean just about any solid color. Black, matte black, blue, yellow, red, etc. I will try to work on the other designs asap.

Matt

[FIDOSOL]

Good man, thanks for doing what you do.

[climberfreak]

that sounds great how would we go about ordering one? you will accept paypal?

[matter]

Sure thing, pay pal me at [email protected]. Check or mo is cool too.

Thanks, Matt

[Thaloc]

HOw much if I ride down and pick one up?

[matter]

no extra charge! :p
(but I could take off a few bucks from shipping)

[matter]

Here are a few ideas and colors.
http://www.buellxb.com/buell_images/2032_20081015140057_L.jpg
http://www.buellxb.com/buell_images/2032_20081015140128_L.jpg
http://www.buellxb.com/buell_images/2032_20081015140152_L.jpg
http://www.buellxb.com/buell_images/2032_20081015140216_L.jpg

[FIDOSOL]

nice

[climberfreak]

would you be able to do white?

[Odin]

Matt- I don't know why, but the Dark gray on your bike seems to me to be the best color (since I also have the Trans Red color). You know, it's subtle, yet very noticeable-- Might just have to get a set of those!

[matter]

Sure, white, off white, creme or even pink or just about any color you can think of is not a problem and the same price will apply to most.
The samples I posted are on a picture of a bike that I happened to have on file and are to just get general ideas. The ones on my own bike at the top of the thread are matte black and are very subtle but quite noticeable also. A solid dark or even light grey would be nice with any color also. I think with the translucents the colors should either be pretty dark if they are to be the same color as the plastics, or black or grey would go good with those also.

Thanks for the interest, Matt

[xtremelow]

nice

[climberfreak]

hey matter i just sent you the money for a white sticker via paypal

[matter]

climberfreak, your graphics will go out 10-23.

Thanks, Matt

[matter]

Graphics still available...

Matt

[RegulatorMIA]

i hope you're still doing this when i get my bike in feb/march lol

[dave_xb12r]

why dont you just figure out what color bike you're gonna get and buy them now

[RegulatorMIA]

well i already know i'm going to do pretty much everything in c/f so the same color as matter's would be perfect

[Buell_Cru]

Matter,

What's your e-mail address I need to ask something real quick?

[dave_xb12r]

[email protected].

[Stevenc150]

As of his 11/27 post, his e-mail is: [email protected].

Edit: Posted same time as Dave

[Buell_Cru]

Thanks guys, I caught that after I posted...lol[smirk]

[matter]

Thanks Larry, your black matte decals are on the way!

Matt

[H2oWerker]

matter
I love what you've done! I'll be ordering some graphix from you soon. I hope. Can you get vinyl in metallic or pearl colors?

Oh and I thought I was the only person w/ bar-end mirrors hanging waaay out.

[matter]

No problem on the metallic's, I can check on pearls.

Larry, more decals on the way!

Matt

[matter]

Larry, glad you like your decals! Drop a picture here sometime of all three bikes, it would be nice to see how the different combo's look.

climberfreak, how did the white turn out?

Matt

[buell9]

Matt, got the stickers on but have to get picture, file id too large for BuellXB.com. I'll try and post soon.

[matter]

I'm looking forward to seeing them! I usually resize my pictures with something simple like microsoft picture manager, and resize them to 50% of the original.

Matt

[SeabeeBueller]

Quick question Matt, could you turn the lines at the back of the Pegasus into flames? I know it would have to stay same color but can you cut em like that?
Bill

[buell9]

Matt, got the graphics on my wifes XB9SLhttp://www.buellxb.com/buell_images/2836_20090114200226_L.jpg

[H2oWerker]

matter, I sent a payment your way today!:)

[matter]

buell9, thanks for the picture. Love that white on white, super clean looking bike!
SeabeeBueller, how's this look? Same price if your interested.

Matt


http://www.buellxb.com/buell_images/2032_20090116161838_L.jpg

[SeabeeBueller]

I personally think that is badass! Im thinking... gloss black on my graphite frame??
http://www.buellxb.com/buell_images/2736_20081230140907_L.jpg

[SeabeeBueller]

I forgot to ask, but do the flames reach the welds? BTW...[up][up]:D

[matter]

Gloss black would look nice for sure, they wii go slightly past the weld area. About the same lenght as the others. The vinyl lays down real nice and won't be a problem there.

Matt

[Odin]

Damn Matt, and I thought the original was a bad ass job!
Flames really look nice as well... *sigh* trying to find spare cash laying around [cool]

[matter]

http://www.buellxb.com/buell_images/2032_20090117002403_L.jpg

[SeabeeBueller]

Ummmm ....yeah I think that is going to work quite nicely.[up] you said $37 right? I will order in the next day or so.
Bill

[H2oWerker]

Just got my graphics yesterday. They look great! I can't wait to apply them, but that will have to wait for warmer weather.

[SeabeeBueller]

Hey matter, I'm still waiting on funding authorization from the bossman, that gloss black is badass.

[buell9]

http://www.buellxb.com/buell_images/2836_20090125140252_L.jpghttp://www.buellxb.com/buell_images/2836_20090125140318_L.jpg
http://www.buellxb.com/buell_images/2836_20090125140423_L.jpghttp://www.buellxb.com/buell_images/2836_20090125140408_L.jpg
http://www.buellxb.com/buell_images/2836_20090125140336_L.jpg

Matt, here are a few pics of the buell's with the pegasus on them. The airbrush work you did was hard to pick up with the camera I have, but looks great under the orange valencia airbox cover. I am still needing 2 more pieces of carbon fiber to finish out the xb9s bike, but hopefully will be done soon. Larry

[buell9]

http://www.buellxb.com/buell_images/2836_20090125140336_L.jpghttp://www.buellxb.com/buell_images/2836_20090125142519_L.jpg
http://www.buellxb.com/buell_images/2836_20090125142342_L.jpg

Matt, added your pics of airbox cover
http://www.buellxb.com/buell_images/2836_20090125140318_L.jpg

[tf1175]

either buell9 or matter,

if you dont mind me asking, how much would an airbrush job cost me for the inner black cover as pictured above? I know every job would be slightly different but about how much? thanks

[buell9]

Matt did the airbrush work for me as well as the frame pegasus', but I don't know what he would charge for airbrushing your particular airbox, just told me depends on how much detail you are looking for. This really looks cool under the translucent covers though. Buell makes an assortment of different airbox covers depending on your model year so designs could be endless. Matt made this appear to be coming from the nipple part outward in skullys and smokey flames at my request. BUELL9

[matter]

buell9, thanks for the pictures, looks good under the orange!
tf1175, as buell9 stated it really depends on how much detail, but typically I can do an airbox lid for $150+. Makes for a real nice effect with alot of depth under the translucent plastics. As always, it's hard to get the full effect in pictures, very unique!

Thanks, Matt

[tf1175]

email sent to you matt

[MONSTER]

hey guys what do you think of putting a red translucent lightning airbox on my red bolt? havent seen a translucent red lightning so i dont know what the difference in color is between the two just thought it might look bada$$.

[Stevenc150]

It's your call, but it may not look right. I don't have photoshop but here's pics for comparison, it's an obvious difference in shades.

http://www.buellxb.com/buell_images/2339_20090130214047_L.jpg
http://www.buellxb.com/buell_images/2339_20090130214035_L.jpg

[matter]

Could be cool if the colors don't clash.
Hey, who is gonna be the first to order the flametailed Pegasus decal I designed on the previous page? Sure would like to see it on a bike.

Matt

[SeabeeBueller]

Hey Matt, I will order it soon. Im waitin on my taxes for some spendin money for the bike. As soon as I get it in I will email you. I really like the gloss black with the flames.
Bill

[matter]

Sounds good SeeBee, I am excited to see a few of that style out there. It was a good idea you had!

Matt

[balls_out]

hey matt, hey i want a set of the frame graphics.. also i want a set of tank graphics as mine are taken off.. and maybe something small for the back the says like firebolt or something.. but curious if you could change the font, and make them in something tribal or something modern looking.. and give me a price on something like that total.. thanks dude.. look forward to seeing what you come up with.. also im a painter.. and im tryin to come up with a cool color scheme for my bike.. it's red with the yellow, and i hate it.. anyone out there got a great idea let me know.. im thinkin of painting the wheels something different though.. maybe even just a matte black to and keep it red or something.. thanks everyone

[matter]

Sounds like a good idea, you mean change the font on the tank "Buell"? No problem. So, your bike is red with yellow wheels? Or what combo is it? Also, give me a rough idea on the size for the back, height and width you think it should be.

Matt

[balls_out]

yeah change the font of the buell sticker on the tank i just want it like tribal.. or modern looking i dunno something cool.. and on the back of the i dunno like an inch or inch and half tall, by like 4 inches long or so.. whatever looks good i guess.. and yeah its red with the yellow wheels.. but if i keep it red.. im goin to paint the wheels or have them poweder coated like a satin black or something.. i hate the yellow wheels..

[monkeyn9ne]

that is a sweet paint job. i need my own now. thats badass!

[balls_out]

u still on here?

[matter]

Who me? I'm still here. Ready for some decals?

Matt

[grillphil]

Matt.

I need a pair of (graphite grey)BUELL decals for the black airbox cover on my XB12Scg.

The standard height of the 'B' in Buell is approx 60mm and this size would do fine.

Do you produce any, if so what will the cost be to supply to the UK.

Please email me [email protected]

Cheers, Phil.

[matter]

Thanks, sent an e-mail.

Matt

[matter]

Hey balls out, did I ever get together with you on some decals? I can't remember, if not then shoot me an e-mail.

Matt

[balls_out]

no you didnt i would love to get something figured out would love the ones for the frame, and would love something for the airbox cover or tank whatever ya wanna call it.. thanks.. heres my email [email protected] thanks again

[balls_out]

no you didnt i would love to get something figured out would love the ones for the frame, and would love something for the airbox cover or tank whatever ya wanna call it.. thanks.. heres my email [email protected] thanks again

[MTYooper51]

Matter, shot you an email for vinyls. Thanks!

[Buelliganxb9]

Matt, getting lots of compliments on the airbox cover paint from all my Jap bike friends. thanks

[Thaloc]

Finished mine a week back. Looks great! I found it easier to cut the tail half away from the head and to lay them individually using the top of the frame as a guide. Thanks Matt for all the help and the awesome new look!
http://i699.photobucket.com/albums/vv358/08Bueller/DSC03506.jpg
http://i699.photobucket.com/albums/vv358/08Bueller/DSC03510.jpg

[dave_xb12r]

Damn that looks good! [up]

Thaloc, have you considered taking your belt guards off?

[Thaloc]

I had, but when the lowside happened the bottom one saved my rear sprocket. Seems more practical to keep them.

[dave_xb12r]

well you should at least take the top one off :D

[H2oWerker]

matter, I finally got the graphix applied to my bike today. Wow! They look better in person, and I couldn't have been more pleased w/ your service.

http://farm4.static.flickr.com/3636/3375700309_811f5ea921_b.jpg

And here's what I had made (locally) for the Airbox cover/Tank. It seems people are interested in all sorts of vinyl from you.

http://farm4.static.flickr.com/3594/3375718329_63ff421303_b.jpg

Keep up the good werk!

[Odin]

decals looking good.. that color looks almost like Kawasaki Green to me.. but hey whatever works :)

[xtremelow]

matter, wondered if you could do either a silver or clear grippy tape in the pegasus?

I like the design but I am all about cleanliness so I would like to keep things low key thus a matching silver or clear.

Shoot me a line for possibilities and prices.

[email protected]

Thanks Brandon

[dave_xb12r]

Looks awesome H2Owerker! [up]

[matter]

Nice bike, H20!
xtremelow, I will check with my vinyl guy to see what is available.

Matt

[matter]

:D

[xtremelow]

Sweet

[dave_xb12r]

Thanks matt! I have a lot more decals to put on still!

nullhttp://www.buellxb.com/buell_images/1832_20090327193756_L.jpg

[loser54023]

can you do the graphic two colors like the head white and the wing yellow?

[jabar2082]

could you make me some e-mail me everything i need and i will order them from ya. [email protected]

[horseplay]

Id like a set as well. Dark gray...little darker than the 12 frame. Subtle works for me :) Wondering if your still making them...if so Ill send a payment
Love the look....great work!

[TechMagic]

holy crap H2Owerker that bike is sweet. Matter, I tried to email you but it bounced back. Please email me at [email protected]

thanks!

[onelogue]

Hey Matter, probabaly a dumb question but can you pull of the amber orange color to somewhat match the air box graphic on my bike?
http://www.buellxb.com/buell_images/3100_20090326131509_L.jpg

[matter]

Sorry I have taken so long to reply, I have been way behind on a Chopper I am painting for a guy so that is putting everything else behind!
xtremelow, still haven't talked to my vinyl guy, everyone else, YES! Whatever you need I can do, multiple colors no problem, etc. I'll try to follow up ASAP.

Thanks, Matt

[matter]

loser54023, horseplay, oneloque, (and anyone else)shoot me an e-mail on what you want and let's get started!
[email protected]

Thanks, Matt

[xtremelow]

Yeah let me know I would want two sets. One for myself and another for my GF's xb9scg

[horseplay]

Just sent an email and paypal payment
PLEASE note the shipping address in paypal is wrong. Sent correct address in paypal comments and email.
Thanks..look forward to these!!!
nate

[matter]

xtremelow, no luck on the grippy tape, sorry. I can come up with carbon fiber, wood grain, chrome, gold leaf, and sparkley metal flake big enough to be on a bass boat, but no grippy tape... If you decide to do regular vinyl, the medium gray looks very nice and subtle on a XB9.

onelogue, I found a couple of oranges that look to be pretty close for your bike. One would be close to the tank graphic and the other looks more like it would match the wheels.

Matt

[xtremelow]

Could you possibly post a pic of a bike with the medium grey? Or even a photo shop. Either xb9r or xb9s since I have one of both like mentioned.

Thanks Brandon

Edit: I see the yellow buell on pg4 but that grey is still a bit to dark for my taste. How about a clear vinyl? Then I know it will be the grey I want.

[matter]

Sure, or a fine silver would be VERY subtle also, almost ghosty.

Matt

[xtremelow]

Yeah I am sort of looking forthat ghost look, there but not there type deal.

What does this fine silver look like? Can I get a photo shop?

[matter]

I'm not so profound in Photoshop... I'm not sure if it would show the difference accurately anyway. I just got back from my vinyl guy's and he showed me some clear frosted vinyl that might give you the effect you want nicely. (and safely) What do you think?

Matt

[xtremelow]

Let me throw it by my Girl and see what she thinks for her bike.

[horseplay]

I recieved the graphics yesterday Matt..THANK YOU for the quick shipping and the extras!
Attempted to put them on this afternoon but the weather took a turn as soon as I started the install....figures. Sun went behind the clouds and the wind picked up.
I did get them on but Im waiting to see them in the sunlight before I praise myself.
Decals are great quality and with a little patience easy to install.
Ill get a couple pics up soon
THANKS!!!

[FIDOSOL]

MATTER, maybe you should talk to BuellXB about possibly offering your vinyls for sale in his shop if he has room and you're interested. Maybe not as an in-stock type deal, more of a must 'order from the warehouse' kind of thing. You seem to be doing a wonderful job, just though I'd toss the idea out there.

[TechMagic]

Matter, I got mine yesterday, thanks for the fast shipping and extras! I can't wait to apply...now if my bike would show up I'd be in great shape ;)

[matter]

Thanks guys, and for the record, the freebie that looks like the Harley logo but says "Motor-BUELL-Cycles" (see below) was sent to me by dave_xb12r, so credit certainly goes to him for the cool design!

Matt

http://www.buellxb.com/buell_images/2032_20090409162004_L.jpg

[racepro716]

Hey H20, I'm just coming off a 83 GPz750, Lime green as any self respecting Kawasaki should be. Bought a brand spanking new white XB12R and love the colour but you've convinced me, I need a complete spare set of bodywork to "green" it up! May take a while but it's sooooo gonna happen!!

[onelogue]

onelogue, I found a couple of oranges that look to be pretty close for your bike. One would be close to the tank graphic and the other looks more like it would match the wheels.

Hey Matter I appreciate the research on finding a matching color, sorry it took so long for me to reply. I'm thinking the graphic should match the "Buell" tank graphic. Here's my email
[email protected]
Do you think the orange will actually look good or should i stick to the black/grey colors? I just want to avoid making the bike look too over-done...

[matter]

onelogue, sent an e-mail.

Matt

[horseplay]

http://www.buellxb.com/buell_images/3418_20090413112855_L.jpg
http://www.buellxb.com/buell_images/3418_20090413112906_L.jpg

[meetch]

That decal looks great on a black frame...

[Jornum1]

Here some pics of mine, Thank Matt, they are awesome!

http://img.photobucket.com/albums/v716/Jornum1/Buell/IMG00015-20090411-1835.jpg

http://img.photobucket.com/albums/v716/Jornum1/Buell/IMG00017-20090411-1836.jpg

[LightningXB12s04]

Matter I was interested in a set of frame graphics in red for my xb12s.whenever you get the time email me let me know. Here is my email [email protected]
much appreciated Kevin

[SeattleBuellMan]

Hey Matter...wow you really got something going there. Saw a Guy on a Lightning on I-5 with that graphics kit and was wondering where he got it...man I love this site. I own a red 06 XB12R. Would love a set of stickers from you say maybe in a flat black. Was also interested in a Buell sticker for my truck. Would stick it up in a corner of my tailgate. White would be awesome for that. Have white Seahawks emblem in middle of gate so up in the corner would be the spot...oohh and maybe some little Buell stickers for the f150 emblems on quarter panels. Would place stickers under those or on swing arms, who knows. Excellent work.....glad I found the posts. Look forward to hearing from you. Ride hard be safe. [email protected]

[pittsleyb]

Here some pics of mine, Thank Matt, they are awesome!

Jornum1, is that a firebolt seat?

[steve may]

Or is it A lightning front end? Regardless that look good.[up]

[dave_xb12r]

Looks like a XB12Ss to me :D

[matter]

Wow, some sharp looking bikes showing up here... looks like everyone is having excellent results with the installation too!
seattlebuellman, I am in Moses Lake, I will shoot you an e-mail, or you can catch me at [email protected]

Matt

[dave_xb12r]

Hey Matt, I'll be sending you some paypal money real soon. I didnt forget about you.

Also, have you tried these decals on a 1125R? I've got a friend who would like to put one on his. If they, fit I'll be ordering 2 pairs instead of the one already quoted.

[matter]

Hey Dave, I would think they would fit. How's the frame area look compared to your bike? If your not sure, I can send you a set for it and if they fit you can pay me then.

Thanks again, Matt

[Sleez]

hey matt,

sent you an email.

are there different decals for the SS and Uly frames?

i would like to buy a set, not sure what color yet??? getting some ideas though!

can you get the reflective stuff, looks black in the daylight, but turns silver/white at night when hit with light???

good job, they look great.

[dave_xb12r]

Reflective? I wish I thought of that!

The last pic posted is an SS frame.

[Sleez]

material like this;

http://www.reflectivedecals.com/flamedecals.htm

maybe i'll have the first ones???!!!

[dave_xb12r]

Wow, if he can do it, I'm ordering a new set!

[Taylon]

I would like a set like Sleez suggested. [email protected] if you can do it.

Great job on your bike, its awesome.

[Stevenc150]

Reflective? Now that would bring a whole new dimension to the frame decal! Nice idea Sleez. [up]

[matter]

I'm sure the Uly frames are the same, no problem. Reflective? Sure, should be no problem. I have, and can get Scotchlite in many colors. That's the stuff you see on like the highway signs (white). Really lights up! I will look into it more.

Matt

[Sleez]

matt,

i would love to have some with the super black type, looks black in daylight, then POW!!!

i would love to have the first set if that is appropriate???

sounds too cool!!!

was thinking about using some reflective decals on the inner airbox beneath my translucid cover, then aiming some white leds at them??? might work, eh???

[chase12s]

Hey Matter, How much do you charge for the set(left and right sides)? I really like the way these look. The black on black frame is so sexy.

http://img.photobucket.com/albums/v716/Jornum1/Buell/IMG00015-20090411-1835.jpg

[matter]

chase12s, $37 shipped for the regular vinyl, the satin black on the 12's looks real nice for sure!
Sleez, I will be sure you get the first set, I have to get with my vinyl supplier to check price and the logistics of doing these in reflective as the reflective is a little harder to apply.

Matt

[Sleez]

matt,

thanks, that will be very cool!

[matter]

OK guys, here ya go. Reflective decals are available now. The first picture is in the shop with normal lighting and the reflection from the overhead lights is what the shiny areas are. No camera flash. The second picture is with the lights turned off and with a flash. Of course they will only be THAT bright if you are hit with a camera flash! Anyway, the main drawbacks to the reflective material is they are a LITTLE more difficult to apply as the material is thicker. Should be no big deal. Looks like they are going to run $57 shipped.
Sleez, you get first shot.

Thanks, Matt

http://www.buellxb.com/buell_images/2032_20090512085306_L.jpghttp://www.buellxb.com/buell_images/2032_20090512085355_L.jpg

[ADAMLEE]

How do I go about getting my hands on these.

[ADAMLEE]

Are these for the frame?

If so woldn't they be coverd up by your legs/knee?

Still look hot though.

[only1reds]

Matter you have a nice thing going on here my friend. Beautiful work my good sir [up][up]

[onelogue]

Are these for the frame?

If so woldn't they be coverd up by your legs/knee?

Still look hot though.

Just read through the thread and look at the pictures. It's pretty self explanitory. Your leg covers it when riding but it unique.

[ADAMLEE]

Thanks oneloque, I did read after I posted. DOH! Guess I should have started at the begging of the thread before posting.

if there are any available email me

[email protected]

Thanks,
Adam

[Sleez]

hey matt,

very freakin' cool!!!

sent you an email.

where to paypal???

any chance of getting to me before saturday? i am going to infineon for the AMA races, would love to have them on by then.

thanks

lee

[matter]

Thanks guys,
ADAMLEE, actually when your riding most of the frame area shows pretty good unless maybe if you have really long legs.
Sleez, sent you an e-mail.

Matt

[dave_xb12r]

Damn, I think I have to have a set of these! It breaks my heart even thinking of peeling off the ones I already have though.

[Sleez]

i'll post some pice when i get them installed.

[ADAMLEE]

Matt,

If you have any left let me know. I'm very interested! I posted my email in a previous email in this thread.

I'm 6'-1" so my legs are a bit long. But the stickers look great! I'd like to have them for MotoGP at Laguna Seca.

Thanks.

[goatsxb9s]

I'd like to see one all gasser lookin with a gold-leaf pegasus logo and candy colors, just for sh!#s and giggles.

[matter]

Davexb, I know what you mean! The reflective's are pretty cool! Your others are going out today.

ADAMLEE, do you mean the reflectives? That was the only set I had, but I will need to order more material for more. Pretty spendy stuff so I will order some after the orders are put in. I can get it in other colors, but I can't imagine any other color than the black looking right, although the white would look good on a white bike. If you mean the regular vinyls, sure, I have more of those available. I overlooked your e-mail, I will contact you.

goatsxb9s, that could actually be done in vinyl as gold leaf is available as are translucents that would look like a Kandy red! A little spendy I would guess, but it would be cool for sure!

Matt

[Sleez]

ok, all you experts that have already installed these; any tips or tricks to make sure i get them perfect the first time?

are they dry or wet applied?

thanks

lee

[dave_xb12r]

Well matt didn't send instructions?

Installed wet, let it dry, squeegee it out. I thik you help it dry with a hair dryer. I cant remember when though.

[Sleez]

i haven't received them yet, i am sure he included instructions, i just want to be prepared.

thanks

[ADAMLEE]

Matt, I want the reflective ones please. LET me know when you need the moola!

[matter]

http://www.industrialsign.com/Controltac_application.pdf

Here is a link that explains the installation of the reflective material, this is for controltac adhesive and it will say controltac on the paper side of the material if that is what it is. The controltac allows you to reposition if needed. Try the same method with regular adhesive and you will ruin it. That said, I would use a little wetting agent anyway to be safe. It just takes longer.

Matt

[Sleez]

matt,

what exactly should i use as the "wetting" agent?

thanks for all your help.

[matter]

There is a paper with the decals explaining installation, but basically it is a spray bottle full of water with a little liquid dish soap.

ADAMLEE, forgot to answer you, sorry! You can pay pal me at my e-mail, [email protected].

Thanks, Matt

[Sleez]

matt,

thanks, i may try it dry as the instructions you linked say, they do say to make sure the surface is completely dry...hmmmm

thanks for the info.

lee

[Taylon]

Sleez,

I really want to see some pics when you get them on.

[matter]

Yeah, but their reasoning for keeping it dry is to speed production. If you wet it you need to keep it in place for a little while befor you pull the transferpaper from the faceing surface. Like I said, only with the controltac adhesive do you have the option of repositioning the vinyl. Either way the key is patience...

[Sleez]

Taylon;

will do, i plan on putting them on tomorrow after it warms up a bit.

Matt,

ok, good to know, i want to do it the way that will allow me to get it as straight as possible, so will probably try wet.

thanks again

[Sleez]

ok guys, have you been installing all as one decal, or doing it in two pieces, the head and wings separately?

thanks

[matter]

I would do as one piece to keep the orientation and spacing correct, but if you decide to split it be sure to give yourself some reference marks to adjust to.

[Sleez]

i installed them, pics later.

started on the right side, tried it dry...don't do this!!!

got way too many bubbles and they don't work out very easily, not happy with my decision to try it that way!! damn.

the left side i did slightly misted as matt suggested, went much, much better!!!!

i may want to replace the right side, i will wait to see if they work themselves out or not, not very hopeful though!

thanks matt, wonderful product!

[klan52]

hey matt, just got the graphix in yesterday and put them on today here are some pics, easier to see in person and the sunlight, but adds a nice ghost look over my black frame
http://www.fileden.com/files/2007/10/2/1478173/buell2.JPG
http://www.fileden.com/files/2007/10/2/1478173/buell1.JPG

wouldn't let me post them on here

(Edit: Here ya go - Also, here's a thread that might help: How to Post Pics (http://www.buellxb.com/Buell-XB-Forum/Technical-Issues-with-the-Forum/How-to-Upload-Pics-on-BuellXB.com))

http://www.buellxb.com/buell_images/2339_20090516213816_L.jpg
http://www.buellxb.com/buell_images/2339_20090516213847_L.jpg

[Sleez]

klan52;

yours turned out great, good job.

her's mine; the good side...

http://i383.photobucket.com/albums/oo278/SleezUly/P5160812.jpg

http://i383.photobucket.com/albums/oo278/SleezUly/P5160815.jpg

the not so good side;

http://i383.photobucket.com/albums/oo278/SleezUly/P5160816.jpg

have to wait until dark to get some reflective shots!

[matter]

klan52, nice job, sharp bike!
Sleez, thanks for the honest assesment, can't wait to see the night shots.

Matt

[loser54023]

het matter just wondering if you got my set shipped yet. i'm just a little impatient. wanna get them on.:D

[Sleez]

here it is: sweet!!

http://i383.photobucket.com/albums/oo278/SleezUly/P5160818.jpg

[Taylon]

[up] [up]

[matter]

Wow Sleeze, those things look great in the night shot!
loser54023, I can't seem to match your forum name with any e-mails so I am not sure which ones you ordered. If they are the reflectives it will be a few days still as I had to order the material. Shoot me an e-mail so I can match you up.

Thanks, Matt

[loser54023]

sorry matter it's [email protected] i was just thinking about that. sorry

[Odin]

Man that's a helluva difference in the low light shot. You'd hardly know it's the same decal !

[klan52]

those look amazing in the low light sleez, make me wish i woulda read the whole forum before I ordered my stain blacks, but still happy with what I got, little touch that makes all the difference. and thanks to whoever edited my post and gave me the link to how to post pics...[up]

[Sleez]

thanks everyone, sometimes a plan just comes together.


lee

[dave_xb12r]

Looks great sleez!! did you try leaving it out in the sun for a day to see if the bubbles go away? Xtremelow was saying that when he installed vinyl, that was his trick

[matter]

Hey Sleez, let me know if they don't go away. I can always just make one side for you.

Matt

[Sleez]

hey matt,

they haven't gone away yet. i'll live with it for awhile, i'll let you know if it bothers me too much. they are great. i love when it is near dusk and there are some lights on in the area, the decals start to glow at certain angles, looks cool as hell.

i am sure the effect would be hard to capture in a pic.

[xtremelow]

You may have to let the decals set out for a couple weeks before you see the bubbles go away, be patient that is and has always been the biggest problem, people dont wait and try to redo it to only have it do the same thing.

If all else fails and you do need to redo the decals spray water(heavy mist) on the frame so you can squeegee out the bubbles as you lay out the decals, and dont need to worry about them sticking as soon as you lay them out.

[Sleez]

the second one i did, i used a light mist, it worked much better, wish i would have done a heavier mist, and on both sides...now i know!!

[1stxb9r]

another trick is to use a VERY fine threading needle and poke holes where the bubbles are then with a smooth piece of plastic run it across the graphic to smooth it out, but not tear holes in it. matt sending you an email tomorrow I would also like a set of reflective graphics.

[Sleez]

i spent about an hour poking holes and smoothing out, helped a lot, but still only a dent in the amount i got trying to do the one side dry!

[matter]

Ok Sleez, we just can't have you spending all your time popping bubbles instead of riding! I will send you a replacement, no charge. Which side was it again?

Matt

[Stevenc150]

Very cool of you Matter. [cool][up]

[Sleez]

hey matt,

not necessary, but it was the right side.

thanks for everything!!!! you rock!!!

[abiohazard]

So many sweet paint jobs on here...well, mine just seems...PLAIN! lol. I haven't done anything with it yet...

[matter]

Thanks guys, no problem Sleez. I don't want you to have to park the thing to hide the bad side all the time, imagine the pressure! :D Plus, I gained a couple rep points... cool. It will be a day or two before the next bunch of reflectives go out.
1stxb9r, no problem, send me an e-mail. I should be able to get them out this week with the others.

Matt

[matter]

abiohazard, some sweet vinyl would be a great place to start! I think you will have a hard time finding a better visual bang for the buck, they really set the bike off in person.

Matt

[loser54023]

got the graphics and put them on today

http://www.buellxb.com/buell_images/2358_20090522141444_L.jpg
love em one question about the extra ones you gave me HOW DO YOU SPELL BUELL????

http://www.buellxb.com/buell_images/2358_20090522141007_L.jpg

J/K thanks for the extra decals they look great toohttp://www.buellxb.com/buell_images/2358_20090522141106_L.jpg
http://www.buellxb.com/buell_images/2358_20090522141153_L.jpg

[loser54023]

i need a new camera :(

[matter]

Can't tell too clearly from the pictures, but did I lose an "L" on one of those? Bike looks good, but hard to see the white wings in the pictures. I agree, I think you need a new camera! :D

Matt

[chase12s]

I've ordered a set of the black ones. I can't wait to get them put on. I'm hoping they give it sort of a ghost effect on the dark grey frame.

[loser54023]

ya you forgot an L lol

[loser54023]

hey matter could you make me some 13's for a number plate? i am thinking about doing just a bunch of them in different sizes and fonts put on randomly on the front number plate all in the yellow you did for me.

[matter]

Sure, that could be done, send me an e-mail. Meanwhile, I can look around for that "L". Probably stuck to the dog or something...

Matt

[matter]

Oh yeah, for those waiting for reflectives, I found out the material should be in Tuesday. Shipper forgot to ship it!

Matt

[lonewolfnavet]

That is such a great concept! Great vision amigo!

[only1reds]

wow those nightshots looks awesome

[matter]

Hey dave_xb12r, how did the graphics fit on the 1125? Are they going to work?

Matt

[dave_xb12r]

My friend has been lazy and hasn't put them on yet. He said they do fit though. Which reminds me, I still owe you for those. Duhhh... How much was that? I'll send that paypal right away!

Thanks Matt!

[matter]

No biggie, $37 same for you. Let me know if the fit is the same as the XB's or if needs adjusted.

Thanks!

[dave_xb12r]

paypal sent. I'll try to get him to put them on ASAP

Thanks!

[xtremelow]

Matter, If you can ever get these in the grippy vinyl like I had asked let me know.

Otherwise I am going to pass, would like to get a little purpose with the look.

[dave_xb12r]

would like to get a little purpose with the look.

I think thats the only time Brandon will ever say that lol

[chase12s]

The best side:
http://img200.imageshack.us/img200/977/40110105013892191740.jpg

The other side:
http://img34.imageshack.us/img34/3803/40110138013892203380.jpg

[chase12s]

here we go!
http://img34.imageshack.us/img34/3803/40110138013892203380.jpg
Thanks to matter for an excellent product!

[loser54023]

finally got a new camerahttp://www.buellxb.com/buell_images/2358_20090531155122_L.jpg looks alot better

[matter]

Man, those look nice guys! loser54023, that looks sharp, the 2 tone!

Matt

[xtremelow]

Low Ball I would have to say Dave, although very true due to my last set of Ideas.


Quote:
would like to get a little purpose with the look.


I think thats the only time Brandon will ever say that lol

[Taylon]

http://www.buellxb.com/buell_images/3735_20090601182455_L.jpg

Here is my reflective decal, My pegasus was bitten in the neck by a rabid dog.

Matter,
Thanks for the new head!

http://www.buellxb.com/buell_images/3735_20090601182421_L.jpg

[Taylon]

http://www.buellxb.com/buell_images/3735_20090601183121_L.jpg

Here is my "good side"

[matter]

No problem, we all lose our head now and then...

[taylor]

matter i NEED stickers
[email protected]

[xtremelow]

What does the reflective look like in the light?

[Sleez]

like this;

http://i383.photobucket.com/albums/oo278/SleezUly/P5160812.jpg

http://i383.photobucket.com/albums/oo278/SleezUly/P5160816.jpg

night;

http://i383.photobucket.com/albums/oo278/SleezUly/P5160819.jpg