Location of the exhaust valve actuator and others wiring under the seat.

[jfman]

Puting the bike back together after 3 years and I cant remember where the exhaust actuator is located in the tail section of my xb12s. I dont know the routing of the actuator cable either.

Same thing for the ground cable I cannot figure out where it is located.

[user_deleted]

exh. actuator box is under airbox cover, on top of black plastic airbox lid. cable runs down rear of airbox, to right side of motor and to front of muffler attaching to actuator valve. ground cable is a short cable and attaches to frame lug/post with washer and locknut.

[jfman]

I was trying to look for its place in the rear subframe section... Ok :-D Thanks!

[jfman]

I also have two vaccum hoses coming off the valve covers. These fit int the two holes in the bottom part pof the airbox right?

There is also a tiny vaccum hose hookup at the mouth of the throttle body but I dont know which hose would go there...

[freak2180]

I also have two vaccum hoses coming off the valve covers. These fit int the two holes in the bottom part pof the airbox right?

There is also a tiny vaccum hose hookup at the mouth of the throttle body but I dont know which hose would go there...

correct, correct

cap it.....its not used unless urs is a cali bike.

[jfman]

Thanks for clarifying