Pics of your after market turn signals

[Azxb12s]

I've searched the threads, and am looking for turn signals that are much smaller than the stock. I'm tempted to just remove them and use hand signals!

[Lesley]

Try any local motorcycle store like CycleGear. If there aren't any local try fleebay. Lots of the guys have LED's replacement. I opted for the regular 12 volt standard bulb. Keep in my mind if you go LED you'll need a new flasher as well because LED's only use approx 2 volts as opposed to 12/13.8

Good Luck[up]

http://www.buellxb.com/buell_images/9095_20110315091722_L.jpghttp://www.buellxb.com/buell_images/9095_20120111124847_L.jpg

[Azxb12s]

I just don't want to buy any and the stalks be to small for the holes

[Jabaniz]

http://www.buellxb.com/buell_images/3910_20100529104208_L.jpg

[batman6669]

Here's minehttp://www.buellxb.com/buell_images/3426_20100827092807_L.jpg

[mattcreswell]

Cycle Gear $20 a pair
http://i1187.photobucket.com/albums/z387/creswellmatt/5df22840.jpg

[oh9bolt]

R6/1 Flush Mounts on ebay, $12 shipped.


http://i150.photobucket.com/albums/s103/jacogan/BUELL/d0413aa7.jpg

[Rhino1]

My S with Oberon LED's:

http://i10.photobucket.com/albums/a141/Erwin8r/b7fe80a5.jpg

http://i10.photobucket.com/albums/a141/Erwin8r/665274e4.jpg

They are "dual sided," meaning they blink front and rear, and I have the same ones up front. Very cool, but a bit pricey.

[Azxb12s]

Thanks for all the help guys,

[Loki]

http://sphotos.xx.fbcdn.net/hphotos-ash4/385577_10151032609801679_43054882_n.jpg

[Azxb12s]

Those club man bar ends are pretty sweet. Did you have to drill more holes into the bars?

[Headbarcode]

Rhino and Loki those signals look real slick. May i ask how much? I tried the site but got nowhere. Ipod limitations i guess. Thanks

[xtremelow]

http://www.buellxb.com/buell_images/520_20110706224116_L.jpg

[Rhino1]

Here is a link for the bar-ends:

http://motowheels.com/i-7140015-oberon-bar-end-turn-signals-w-crg-mirrors.html

And for a set like mine:

http://houstonsuperbikes.com/i-8561627-oberon-mini-bi-directional-led-turn-signals.html

I don't know either of these vendors, FYI. Just posting for pricing, etc.

[bigrodge8]

I just took some led strips and ran them down the passenger pegs and along the side of the tail.
http://i105.photobucket.com/albums/m224/bigrodge8/DSCN0149.jpg

[nikfleisch]

Autozone led strips, cheap and bright [up]

[bigrodge8]

yeah they work pretty good. I was thinking about using some of the led strips that I make for extra brake lights too.

[Loki]

Yes

[Azxb12s]

Strip lights = awsome I love how they don't stick out

[Azxb12s]

hey, BIGRODGE8 where did you place the ones on the front?

[bigrodge8]

im still using shortened stock signals up front, however im going to wrap two strips around the lower triple clamp under the headlights. im going to place it so that it is visible from the front as well as the sides.

[nikfleisch]

Finally Uploaded the picture of my rear end :p
http://www.buellxb.com/buell_images/9918_20120618120614_L.jpg
Led Strips [up]

[jammer84_03]

http://i105.photobucket.com/albums/m216/jammerjamming/IMAG0574.jpg

[Azxb12s]

Nice!

[kbaddict]

http://www.buellxb.com/buell_images/3345_20110324122738_L.jpg

[dhc]

http://s9.postimage.org/dtr8wgdnj/image.jpg

Got same for back

[g3stripes]

led stripshttp://www.buellxb.com/buell_images/6_20120618201730_L.jpghttp://www.buellxb.com/buell_images/6_20120618201814_L.jpg

[Azxb12s]

g3stripes i like your setup i asume you did the tail strip with two strips split how did you get your tail like that with the brake light and no fender?

[g3stripes]

i made the tail section, and the brake tail turn is from custom dynamics they will custom make whatever u want. that thing in tail is camera. http://www.buellxb.com/buell_images/6_20120618201908_L.jpg

[Rhino1]

Where are you guys getting brake/running taillight strips?

[nikfleisch]

Any auto store. 20-36$

[g3stripes]

custom dynamics

[g3stripes]

custom dynamics will make u custom lenth and config and they last a long time, i had limited luck with cheap versions

[OldGeezer]

http://www.buellxb.com/buell_images/11513_20120620083316_L.jpg
http://www.buellxb.com/buell_images/11513_20120620083232_L.jpg

Kellerman 1000's not cheap, but nice LEDs and bright!

[ct1200]

I just picked up a set of the Rizoma zero 11s.
Nice and bright when they are on, even in daylight, small enough to not notice them when off.

Went on a ride with a few buddies last night and out of about 10 bikes, 3 of us all had the zero 11s, I was the only Buell.

[BuellsRuell]

I installed the Oberons recently. VERY happy with them so far! [up]

http://www.buellxb.com/buell_images/17387_20131124133749_L.jpg
http://www.buellxb.com/buell_images/17387_20131125102403_L.jpg
http://www.buellxb.com/buell_images/17387_20131125102426_L.jpg
http://www.buellxb.com/buell_images/17387_20131125102454_L.jpg
http://www.buellxb.com/buell_images/17387_20131125102441_L.jpg
http://www.buellxb.com/buell_images/17387_20131125102506_L.jpg

[DrogeN Omen]

http://www.buellxb.com/buell_images/5539_20131110171437_L.jpg

[SEXT9]

http://www.buellxb.com/buell_images/10688_20130830211100_L.jpg

[epion420]

http://www.buellxb.com/buell_images/16723_20131125171220_L.jpg

[anrkizm95]

I installed the Oberons [up]

[cb750]

I've got some cheap chinese ones from ebay, 4 for $20. Two of the lenses fell off and I only found one. Either I'll buy a couple more to match, or buy some nicer ones.

I didnt buy a new flasher, i used the DIY mod on my stock flasher. It didn't look exactly like the one in the thread, but it still worked.

[Matteson]

Chinese markets and the people that buy into them are ruining our industry and country.