Will this work with my XB9SX?

[BenAlpha]

with this work with my stock XB9SX mirror mounts?

Ram Mount (http://www.ebay.com/itm/RAM-Mirror-hole-adaptor-1-ball-M10-x-1-25-pitch-male-thread-/180917025936?hash=item2a1f7ebc90&item=180917025936&pt=Motorcycles_Parts_Accessories&vxp=mtr)

[somecallmery]

should work. I think I bought m10x1.25 bolts to plug the holes on my xb12s

[BenAlpha]

thanks for the reply.
I'm really looking to for a 100% answer from someone, shipping on this thing to
israel is ridiculous and I don't feel like spending money on an expensive bolt... ;)

[Radioactive]

I like this option better

https://www.gpscity.com/ram-mount-motorcycle-handlebar-clamp-ram-b-367u.html

You can vary the size of the bolt (use a few washers for spacers if you need) to suit your needs, and it will work lots of different places on the bike. I even ran a bolt through the center mount hole on the passenger peg to mount a GoPro for a few rides.

[BenAlpha]

well, I want it to mount to the mirror mount hole :) but thanks.

Anyone else?

[thrstrmech]

Do you have a caliper to measure the mirror base adapter of your stock mirrors? thread pitch gauge? it's stated to be 10mm x 1.25 pitch...stock mirror adapter base is 10mm, just have to make sure the thread pitch is correct...

I have the tools at home, can get back to you with the info later today

[BenAlpha]

I do not have these kind of tools... (i feel emasculated)
I would very appreciate it if you could measure it and let me know. [up]

[thrstrmech]

yes, the Ram mount will fit...measured the stock mirror base (10mm) and checked the thread pitch (1.25mm)

http://www.buellxb.com/buell_images/10624_20121026115832_L.jpg
http://www.buellxb.com/buell_images/10624_20121026115807_L.jpg
http://www.buellxb.com/buell_images/10624_20121026115739_L.jpg
http://www.buellxb.com/buell_images/10624_20121026115711_L.jpg

it's all good[up]

[BenAlpha]

YOU'RE THE MAN.
Thank you, so much.

[thrstrmech]

no problem[cool]