PDA

View Full Version : leaking problem, map issues xb12s 07



osm
05-20-2013, 12:43 PM
hello guys,

i wanted to fix couple of problems in my xb12s, first leakages :
i have a small primary fluid leak for the primary case where's the clutch cable plugged in, i can see the
oil Drains lightly on the cable,
what kind of seal should i order? i do i fix it? do i need to drain all my primary fluid and open the case?
2. i have one more leak, very light one also from the front top cylinder don't know exactly where from i added a photo. http://i39.tinypic.com/2lnirli.jpg what kind of sealing should i order?

main question and the one that's bothers me so much!! please guys help me :(
i need a suitable map for my buell xb12s 07 30k miles , Micron full exhaust, K&N air filter ,breather.
i have ecm-spy and bought several maps but non of them work like it should be;

does any one have a suitable map for my equipments?
thank u very much:)

osm
05-24-2013, 03:19 AM
no one...? :/


map issues also?

100thwindow
05-24-2013, 05:14 AM
It's an o ring for the primary. I bought mine from americansportbike.com. It was only a few bucks. I drained my oil but I also installed a new clutch cable at the same time. Be careful when threading the clutch cable back in because it is very easy to crush the washer right there. Easiest thing to do is remove the cable from the handle bar and from the primary cover and twist the entire cable at the same time as for the maps I have one that came with a CD I bought. It off of an 07 with a full micron and k& n too so it should work

osm
06-05-2013, 02:15 AM
tnx for the respond 100th! i fixed the leaking it was the O-ring.
did u turn off the oxygen sensor for this map?