• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

oil leak

Buellxb Forum

Help Support Buellxb Forum:

epion420

epion420

Well-known member
Joined
May 11, 2013
Messages
129
Location
Lakeridge Virginia
So today was my first real ride since my top end rebuild any ways long story short my pushrod covers were leaking from the o rings and i mean leaking. Oil was everywhere. I got home and started looking my bike over and noticed I could see part of the o rings. Any ways I was wondering is there anything I could do with out having to move the heads again? Any advice will be great thanks guys
 
contrary to the fsm the o rings must be placed inside the cylinder heads, not on the pushrod covers. no real way to proceed without pulling the heads again. you will also need new o rings.
 

Similar threads

D
Primary drain plug o-ring fraying and front tie rod bolt torque spec
Replies
4
Views
1K
Cooter
Cooter
O
2004 XB12R Crank but No Start - long time reader, first time posting
Replies
5
Views
785
oceanstatejohnny
O
B
Another fan story
Replies
1
Views
848
Cooter
Cooter
B
2008 Uly in need of service
Replies
1
Views
6K
Pushr0d
P
C
Excess smoke through the PVC.
Replies
6
Views
9K
chief_of_smoke
C

Latest posts

Back
Top