PDA

View Full Version : Common mods for a XB



BlackandChrome
06-12-2013, 08:11 PM
I have a bunch of parts left over from my bike. Prices listed do not include shipping. I can email pictures.

1. Drummer exhaust (good shape) ***300***

2. EBR ECM for 2008 w/ Drummer (mint) ***275***

3. K&N w/ open airbox mod (good shape) ***75***

4. Buell Select Seat (very good shape) ***250***

5. Buell rear seat bag (good shape but worth it's weight in gold - has the old school blue/red design) ***75***
greencupbay

6. Red ZeroGravity Double Bubble (you can see the outline where a sticker previously once when your looking for it. Good shape otherwise) ***75***

7. Black ZeroGravity Double Bubble (split off one corner at the mounting point. I have the cracked piece - it should be able to be used) ***50***

8. 2008 Service Manual ***50***

9. Stock turn signals ***25***


Other Misc parts
10. Universal Cortech tank bag ***50***

11. White chin fairing from 2002 X1 ***75***

12. Left side "breadbox" from a 2002 X1 ***25***

13. Headlight housing from a 2002 X1 w/ no glass because it cracked ***25***

14. Never used black header for a tuber w/ 2" collector (I bought it thinking it would work for my 02 X1, but that had a 2.5" collector. It has the bungs for the o2 sensor) ***200***

15. ECM Spy cable ***40***

16. "3D" skull grips from ebay (new -never put them on) ***10***

Jmal18
06-18-2013, 07:00 PM
Still have ECM?

paulda93
06-18-2013, 09:12 PM
what year is the open box air box from?

BlackandChrome
06-20-2013, 02:17 AM
ECM is pending.

I'm not sure what year the open air if from. AFAIK, it'll fit all XBs. (it was on my 2008 xb12r

paulda93
06-21-2013, 11:31 PM
blackandchrome you have a pm sir

BlackandChrome
06-30-2013, 05:18 PM
#9 and #12 are gone. Other parts are still available.

BlackandChrome
07-07-2013, 05:36 PM
#3 is gone

Negative
07-07-2013, 05:57 PM
I need to check out how hard it is to retrofit that X1 chin spoiler to an S1 ... if it's not crazy hard i'd be interested in it ... also gotta do some quick research on the header diameter ...

BlackandChrome
07-17-2013, 11:25 PM
Pictures can be viewed here:
http://www.visiontron.com/test/index.htm


Updated list with what's left

1. Drummer exhaust (good shape) ***300***
<Should fit any XB models>

2. EBR ECM for 2008 w/ Drummer (mint) ***275***
<2008 XB12 + Drummer>


4. Buell Select Seat (very good shape) ***250***
<Fits all XB Firebolts>

5. Buell rear seat bag (good shape but worth it's weight in gold - has the old school blue/red design) ***75***
<Fits all XB Firebolts>


6. Red ZeroGravity Double Bubble (you can see the outline where a sticker previously once when your looking for it. Good shape otherwise) ***75***
<Fits all XB Firebolts>

7. Black ZeroGravity Double Bubble (split off one corner at the mounting point. I have the cracked piece - it should be able to be used) ***50***
<Fits all XB Firebolts>

8. 2008 Service Manual ***50***
<2008 Buell models?>

17. Stock Mirrors (good shape) ***50***
<Should fit all XB Firebolts>

18. Mirror Block Off Plates (I have 4-5 sets that I made ***30 each set***
One set has blems in the powder coat (close up picture on the site) I'll do $20 for that one
<Fits all XB firebolts>


Other Misc parts
10. Universal Cortech tank bag ***50***
<Fits any bike. Velcro and plastic buckles>

11. White chin fairing from 2002 X1 ***75***
<2002 X1 for sure, don't know about other tubers>

13. Headlight housing from a 2002 X1 w/ no glass because it cracked ***25***
<2002 X1 for sure, don't know about other tubers>

14. Never used black header for a tuber w/ 2" collector (I bought it thinking it would work for my 02 X1, but that had a 2.5" collector. It has the bungs for the o2 sensor) ***200***
<DOES NOT work on 2002 X1>>

15. ECM Spy cable ***40***
<Tubers and XBs>

16. "3D" skull grips from ebay (new -never put them on) ***10***
<Universal

BlackandChrome
07-24-2013, 01:59 AM
Drummer and ECM are gone