WTB chin fairing brackets for aftermarket exhaust.

[Draxsonimy]

Looking for the chin fairing brackets

Thanks guys!

[Shawns]

Try Dean Adams
http://www.deanadamsdesigns.com :D

[d_adams]

Had a small problem with the last batch I had made, the offset is wrong and I'm fixing them this weekend. It's the kickstand side bracket, the other side is fine. I'll let you know when I have some available if you want to wait.

[JohnnyD]

[up] I've been waiting too for these... Keeping an eye out for a set once you are done.

[d_adams]

I have one fixed now, just need to let it cool and test fit it again. If I got it all corrected, I'll take it back to the machine shop tomorrow and drop it off with the 8 or 9 that are messed up and get new ones made.

[JohnnyD]

Thanks [up]

[Draxsonimy]

you sell them not powdercoated?

[d_adams]

Yes, I sell them both ways. Bare metal as well as coated.

I'll be getting another batch made when these get corrected, so if you want a set, let me know. I dropped off the corrected version, checked measurements against the existing stuff and it's only off a little, but enough to cause it to bind.

[JohnnyD]

You know I want a set :p Please let me know when and which ones you have ready... I'm thinking powder coated, but bare would be OK. [up]

[d_adams]

I should have the replacements sometime this week. They're all bare metal, the next order will have both bare and coated sets.

[Draxsonimy]

you have them d?

[d_adams]

Yes, I have a couple sets left. Powdercoated, with nuts & bolts.

[Noss4atwo]

Do you have to take off the exhaust to put the brackets on the bike? My bike came with no chin fairing or brackets but I have the drummer ss pipe. How much for set of blk powered coated?

[d_adams]

No, but you do have to remove the kickstand to install the left side bracket. You'll need to take the nut off the front muffler mount bolt and the pulley nuts for the right side. Muffler stays in place. They're $100 a set and I only have a few left.

[Draxsonimy]

what happened to bare metal sets?

[Noss4atwo]

I would like to buy a set. Send me paypall info. please :) Thank you so much!

[Noss4atwo]

And to clarify that these brackets are made to fit after market exhausts that the stock brackets do not?

[d_adams]

what happened to bare metal sets?

Sold them all. The last batch got powdercoated black. I think I have 2 sets left, maybe 3, have to look in the box.

http://www.deanadamsdesigns.com/shop/article_5/Chin-fairing-brackets.html

Yes, they will fit pretty much any standard sized aftermarket exhaust.

[Noss4atwo]

Bracket ordered. Thanks!!!

[d_adams]

Boxed and ready to go out in the morning. I have 2 sets left now.