• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

How would an 04 XB12R stock exhaust perform on a 03 XB9S?

Buellxb Forum

Help Support Buellxb Forum:

It fits but why? The exhaust is heavier and has a valve which won't work on your bike. I purchased a 9 exhaust for my 12 for the valve elimination and lighter construction.
 
It fits but why? The exhaust is heavier and has a valve which won't work on your bike. I purchased a 9 exhaust for my 12 for the valve elimination and lighter construction.
Click to expand...

Oh I didn't know it was heavier. My xb9s' muffler is looking rusty and I've came upon a good looking xb12r stock muffler.
Thanks for letting me know.
 
if you can get it for a good price, I say go ahead, just send it to hawk to get it gutted. it will sound better, won't use a valve system, and it will be lighter afterwards.
 
if you can get it for a good price, I say go ahead, just send it to hawk to get it gutted. it will sound better, won't use a valve system, and it will be lighter afterwards.
Click to expand...

I can get it for free. But will I have to mod anything on the xb9s if I get it gutted?

Also, how much will it cost?
 
Get it gutted by Randy Hawk, you won't need the valve. Your ecm will require remapping which Randy will send to you. Do you have a cable? If not you can order one for 40$. Ecmspy is quite easy to use. Let's us know if you have any questions
 
I have the stock ECM, can that be remapped? Because if so then I'll think I'll go ahead and do it. I'll have to purchase the cable also because I have not messed with the ECM before.
 
its def something you should get familiar with. I've been learning it all winter and at first is scary, and intimidating but slowly Im figuring it all out. and the hawk should run you around 175. that and a k&n will be a very nice improvement for you.
 

Similar threads

M
Fuel injector wires (?) chewed by mice.
Replies
18
Views
10K
marbleon
M
S
What is the current state of XB tuning? I have a loose ends I would like to tie up.
Replies
2
Views
3K
Subarubrat
S
B
GPR Reverse Exhaust MAP/TUNE
Replies
6
Views
4K
Cooter
Cooter
Pandemic
stock crank with 1275 kit
Replies
11
Views
9K
Barrett
Barrett
S
Buell XB9R/XB12R Stock Exhaust/Jardine
Replies
11
Views
5K
SenadXB9R
S

Latest posts

Back
Top