• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

2005 Buell xb9sx won't start giving me codes 44-36

Buellxb Forum

Help Support Buellxb Forum:

K

Kellluca

Member
Joined
May 25, 2014
Messages
5
I have a 2005 xb9sx went to go for a ride was running perfect. Stopped and when I went to go again completely cut out! Giving me code for tps so I changed that still won't run. But now it's giving me codes for bank angle sensor and the fan. Had washed it earlier in the day but it ran fine until then. Have changed tps, plugs, and wires. Could this be a short somewhere? If so plz help!! I'm missing the nice weather. [confused]
 
Bank Angle sensor is a kill switch that cuts power when it senses the bike is at a certain angle. I forgot the exact degree...basically it is supposed to shut the bike off during an lay over or something. Could start with that.
 
Found that it was water in one of my plugs by the front pulley. Went for a ride ran fine then all of a sudden started sputting and backfiring then shut off. Turned it off let it sit for a min the. Got it to ride home. Could a tps reset be needed and all that would go away?
 

Similar threads

A
Check engine light
2
Replies
28
Views
3K
njloco
N
D
Buell XB12XT Low AFV
Replies
12
Views
2K
Cooter
Cooter
U
XB9R Crank No Start
Replies
3
Views
3K
Unknowned
U
M
What goes around comes around
Replies
8
Views
2K
motoguy
M
B
2001 Buell Blast - starts and idles fine BUT sputters/backfires/dies when on throttle
Replies
4
Views
10K
DLiss
D

Latest posts

Back
Top