codyperman
07-20-2014, 08:19 PM
Hello all,
Just have a couple question. I bought a Buell 1125r back in April of this year and had it all taken apart and got repainted and I am in the process of putting it all together.
I had it almost all together and tried to start it but the ignition switch as well as the lights high or low beam plus the horn will not work.
The turn signals on the fairing mirrors and the rear ones all work but the taillight brake light do not.
We have tried to look over about everything and I am at a loss here.
I have a brand new battery. We have checked the relays and all the fuses. We have checked the ground underneath the tail section above the swing arm and the ground at the front end. (which helped the turn signals when we scraped off paint that was left over it!!) We have also checked the start solenoid and by-passed the ignition switch and it will turn.
I have since taken off the left side radiator and found another ground that looks fine.
Is there any other ground issues? Or anything that would be causing this?!? Need to get this bike done by Sturgis this year!!!
Any help would be MUCH Appreciated!!
Just have a couple question. I bought a Buell 1125r back in April of this year and had it all taken apart and got repainted and I am in the process of putting it all together.
I had it almost all together and tried to start it but the ignition switch as well as the lights high or low beam plus the horn will not work.
The turn signals on the fairing mirrors and the rear ones all work but the taillight brake light do not.
We have tried to look over about everything and I am at a loss here.
I have a brand new battery. We have checked the relays and all the fuses. We have checked the ground underneath the tail section above the swing arm and the ground at the front end. (which helped the turn signals when we scraped off paint that was left over it!!) We have also checked the start solenoid and by-passed the ignition switch and it will turn.
I have since taken off the left side radiator and found another ground that looks fine.
Is there any other ground issues? Or anything that would be causing this?!? Need to get this bike done by Sturgis this year!!!
Any help would be MUCH Appreciated!!