Diconnected hose running from the exhaust servo motor

[murray405]

I accidently disconnected the hose that runs from my exhaust servo when I took my tank cover off. The bike sounds like it's missing pressure or something and won't start. Anyone have any pictures or advice on how to reconnect the hose and if thats the main issue? Thanks

[xtremelow]

Not sure what hose your talking about but did you reconnect it?

[steve may]

If you pulled A breather hose loose it should still start, might check for pulled out wires.

[xtremelow]

Yeah I am thinking you pulled the crank sensor or oxygen sensor plug and didn't notice it.

I would say check things over, most likely it is very obvious.

If the oxygen sensor were to be unplugged it would cause the fuel/air mixture to be off, also the MAF sensor sticking up into the air intake would cause bad fuel/air if it were to be unplugged. Both giving the spit and sputter effect.