PDA

View Full Version : ECM SPY tips


Fock347
05-01-2009, 10:20 PM
to all you ecm spy veterans out there. is ther a special way/procedure to load a new map/eprom. a couple days ago my race ecm fried, but i have all the maps and eprom saved on my computer. my questin is can i simply just burn my race ecm eprom on my stock ecm or does it have to be done a certain way.
dave_xb12r
05-01-2009, 10:38 PM
how did you fry it??
Fock347
05-01-2009, 11:31 PM
well i was ridin and all of a sudden it started to fire on one cyclinder. so i made it home firin on one cyclinder, plugged my computer in , showd a code for the fron injector wire grounded or somthing. so i took it apart checked the wire there a few splits in the harness here and ther so i fixed them, put it back together. and the same **** firing on one cyclinder, so i took the rear injector plug and plugged it in the front cylinder 2 c if it was the injector , it wasent. so i grabbed my stock computer plugged it in and everything was fine. so ya i guess i just fried the front injector part of the computer somehow.
dave_xb12r
05-02-2009, 02:36 AM
I would be concerned with whether putting in a new ECM is going to help. How do you know you're not going to just fry your current ECM.

And why did you remap a Race ECM anyways? You could have remapped your stock ECM and sold the Race ECM for big bucks!
matter
05-02-2009, 03:04 AM
I think you should be able to just load the text file you saved your race map to under "load eprom" as long as they are from the same series ecm's.
Fock347
05-02-2009, 05:55 AM
ok i bought a race ecm b4 i knew what ecm spay was, and i kept my stock ecm.i know what fried my rce ecm,i had acouple exposed wires , they must have been arching and shorted out the ecm.
GatorBuell
05-02-2009, 02:34 PM
I would not try to load the eeprom just copy and past the fuel and timing maps. I have read where people have fried their stock ecm loading the race eeprom to it.
Fock347
05-04-2009, 06:39 AM
well just did it yesterday, so far so good. no running problems and i didnt fry my computer.
dave_xb12r
05-04-2009, 08:16 AM
Thats good to hear. I hope they post those Race ECMs EERPOMs one of these days. I'd like to see the differences and compare the 2.
Fock347
05-04-2009, 03:05 PM
ill send you mine if you really want.
buellken
08-24-2009, 09:35 AM
Hi! Mr. FOck347, do you have copies of fuelmappings for xb9?