Do it yourself rear fender elimination.

Micah · Aug 29, 2007

Has anyone out there removed there own rear fender without buying one of those expensive kits? What solution did you use for the turn signals? Where did you cut the fender @?

FYI: 06 XB12S

His_and_Her_Buells · Aug 29, 2007

Plan on doing mine this winter. Have seen several and no two are exactly the same.

Micah · Aug 30, 2007

Thanks His and Hers'! What Im looking for is someone that has done it and maybe some "Make sure you dont..."'s and "I wish I would have...."s. Just mainly to learn what people did to end up with a good result and maybe some things to watch out for--Do you have any freinds that might have done this? Could they offer any experiences?

His_and_Her_Buells · Aug 30, 2007

Wish I could offer some more specific advice. None of my freinds even own a Buell. I will probably pick up a spare on ebay just in case I screw up. They usually go for around $75-100 when they are on there.

LeFox · Aug 30, 2007

I will probably pick up a spare on ebay just in case I screw up. They usually go for around $75-100 when they are on there.

if you mess it up, i'll send you mine for 75$ + transport

Micah · Aug 30, 2007

Thanks everyone! I just took my lightning to the HD dealership to have the front brake switch replaced (under Warranty) and I talked to the guy @ the service desk who is an absolute Buell fanatic. He had the first one in Nebraska (Omaha is where I live) and has since totaled 2 of them and keeps buying them-- He has done about 5 or 6 of these Do it yourself tail mods and he said that anyone with even just a little bit of technical aptitude could do one of these easily. Ive seen 1 of the XB9S's he did and it looks very clean! What they did was use a hack saw to get the shape right (aluminum cuts easy with one) and then used a grinding wheel to finish the edges. Then the guy took the side rails and tail light housing down and had them powder coated--It looks sick! I love how it was blacked out in the back like that! I think I have enough confidence now to give it a shot on my own--If worse comes to worse, I have a guy in town that I could talk to-- The best part about it was the whole thing ran him $50 for the powder coating! [up]

BuellPastor · Aug 30, 2007

Take pictures and share!! [cool]

Micah · Aug 30, 2007

Fo Sho! The one thing I ponder... When I talked to the guy he did say that if I ever get caught in the rain it will spray my wife pretty good in the back with the absence of the cheese grater.. This will take some thought

zombieBUELLer · Aug 30, 2007

thats exactly why i decided not to hack my tail off. even with it and riding on wet roads my back gets muddy and wet. i can only imagine how bad it would be without it.

however .. i still love the way it looks!

His_and_Her_Buells · Aug 30, 2007

Ok, it looks like I will have to get busy inventing a snap on cheese grater replacement that can be put on when the roads are wet. I'm sure I'd be able to sell more than a few.

mrdozer2you · Aug 31, 2007

If your riding when its wet/raining all yor worried about is your back getting wet? Im more worried about the rain drops hitting me at 60+ mph, they feel like a million BB's hitting me all at once ( kinda annoying ) Then im pissed about the time its gonna take me to go and detail my bike. I guess a little water on my backside is probably the last thing on my mind.

LeFox · Aug 31, 2007

I guess a little water on my backside is probably the last thing on my mind.

hehe...not all people have or want the luxury of a "bidet"

Roccodart440 · Nov 4, 2008

Has anyone out there removed there own rear fender without buying one of those expensive kits? What solution did you use for the turn signals? Where did you cut the fender @?

FYI: 06 XB12S

In process

tredhed367 · Nov 13, 2008

For an even better look purchase a TAIL TIDY off E-BAY it is worth the 14.00 dollars!

liloldchevyvan · Nov 13, 2008

hey guys, thanks for all the info post after post. so about hacking off your tail. i recently picked up the new icon moto catalog...bout halfway through there is a pic of a girl on an xb....without the tail.

studied the pic, and sunday we got to work on it. with the right tools, and patience, its not too bad. it looks like a small pair of bull horns extending just below tail light. drilled holes under taillight to illuminate lisc plate. sealed the holes. you can leave the stock turns in place, but take them off so that they dont get jacked up. i will get pics up tomm or saturday...just give me time.

Trill · Nov 13, 2008

I just finished my rough draft tonight. I had to use quite a few different tools to get it done but its pretty much there. I will get some pics as soon as i find my f%%%ing cable for the camera [mad]

liloldchevyvan · Nov 14, 2008

HERES THE FINAL PRODUCT. DID GET A LITTLE CARELESS WITH THE HACKSAW, AND BOUNCED OFF THE PAINT, SO I WILL GET IT SPRAYED, BUT MUCH BETTER THAN THE GRATER!! THANKS!

climberfreak · Nov 14, 2008

ahhh the horns
grr [mad] lol

speedkills · Nov 14, 2008

Hey that looks familiar!!

Mess with Buell get the horns!!

liloldchevyvan · Nov 14, 2008

YUP THE HORNS!!!!!

[mad]

i went as short as possible on mine, any shorter and it would have looked like a button horn buck....not so cool!!!

Do it yourself rear fender elimination.

Help Support Buellxb Forum:

New member

Well-known member

New member

Well-known member

Well-known member

New member

Well-known member

New member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Active member

Member

Well-known member

Member

Well-known member

Well-known member

Member

Similar threads