• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

CRG Hindsight Lanesplitters

Buellxb Forum

Help Support Buellxb Forum:

J

jaywalker

Active member
Joined
Sep 5, 2009
Messages
31
Just put on new Rizoma Grips and bar ends. My CRGs won't fit. So now I'm ordering some new Rizoma bar end mirrors, and the CRGs are up for grabs. Bought them in January for $134+shipping. Will let them go for $80 shipped.
4778_20100306165119_L.jpg

4778_20100306165101_L.jpg
 
The Rizoma bar ends are same diameter as the grip, unlike the stock bar ends. It fit perfect on the stock bar end cap, but on the Rizomas the concave part is nowhere near wrapping around for a really secure grip.
 
i will take them possibly if they fit on my 1125CR. What do I need to do to make these work?
 
They're made to clamp on stock bar ends. Just looked at the Buell site, and the 1125s have the same little black rounded bar end cap as the XB12. Don't need to buy the CRG adapter, as they just clamp onto the cap before it tapers. They are complete, just need a hex wrench to put them on.
gallery_01a.jpg



I'm sure some other folks with these bar ends can chime in. Really like them, and the ability to fold them in when traffics a little tight, but didn't think to check the diameter against the Rizoma bar ends.

I'm in no hurry, and just want someone to make sure they can use them can use them.
 
Sounds good. I will take them and try them. Do you do paypal? I am leaving for work now but will be on here tonight. Thanks for your patience.
 
Nah that was off the CRG website to show the mirrors on the stock bar ends.

This is my bike. I don't have pics with them on my bike, unfortunately.
4778_20100306165204_L.jpg


Yeah I can paypal. I'm in the process of moving right now, give me a day or two to get packing/shipping stuff and time for the post office. I'm in San Francisco in case your local. When I'm ready to mail, then you can paypal me, cuz I don't want you to do it and then have to wait for me to get to to post office. PM me your mailing info. I'll be checking when I have the time. Thanks!
 
Im stooked man! Let me know when to send the money. Cant wait to install them. They should fit. I took measurements tonight.
 
Justin, you have sent $80.00 USD to jay.
We have sent you a receipt for this transaction, and an email has been sent to your recipient.

Payment sent... Let me know when you get a tracking #. PM sent.
 
I like them a lot. Compared to the stock grips, all I can say is they have a "light" feel to them. My hands don't feel as tense after riding with them, and they worked well in the rain with so slip. Don't know if it's also due to the weighted bar ends, but I feel less vibration through the clip-ons.

Got to test the bar end slider tonight when I slowed to make a tight turn, hit a crack in the street, and fell over. I couldn't stop laughing at how retarded that was, but barely a scratch on the bar end and my Dark Hoese fork slider. Very happy about that. Boy, me and my bike have had some funky luck since I bought it in September, and only at 853mi on the odometer.

Whee!
 

Similar threads

A
Headlight Setup
Replies
5
Views
2K
34nineteen
34nineteen
Clanofwolves
Replacement Mirrors
Replies
1
Views
827
Clanofwolves
Clanofwolves
M
My new-to-me project 1125R
Replies
12
Views
956
MATPOC
M
M
Getting Back in the Game
Replies
1
Views
1K
BuddyB
B
M
Assuming similar mechanical condition, keep an '06 or an '09?
Replies
11
Views
9K
motoguy
M

Latest posts

Back
Top