M2 headlight conversion?

[talon]

Anyone do the conversion to the newer style dual round headlight on a cyclone M2? I like the look but wonder how easy it was and also what to do with the small windscreen and gauge cluster to make it look right. Thanks!

[C 10_Dell]

This is kind of a rigged up conversion but it works....

http://www.buellxb.com/buell_images/5918_20100417185805_L.jpghttp:

//www.buellxb.com/buell_images/5918_20100417185053_L.jpg

[pur pony]

here is mine. I used the entire XB headlight, housing, and flyscreen. I drilled and tapped 3 1/4-20 holes in my X1 upper to bolt the housing on. I also had to grind 2 pockets in the XB metal housing to clear the corners of my upper triples. Then i drilled one 1/4-20 in the lower triple and bent a flat piece of aluimnum for a lower bracket. Once installed it is rock solid and looks completely stock. I also made a custom dash housing to hold my factory gauges and did the dual headlight mod at the same time.

http://www.buellforums.com/forum/photoplog/file.php?n=474&w=o
http://www.buellforums.com/forum/photoplog/file.php?n=471&w=o

and here is the gauge housing i designed and built from a rapid prototyping process called SLS (glass filled nylon powder)
http://www.buellforums.com/forum/photoplog/file.php?n=463&w=o

[lightningbolt]

Pony your bike looks great. good job on the mod and the custom gauge housing[up]

[skunkwork]

I really want to do this conversion to my 00 m2. The hard part that i`m having is finding the headlamp assy. Is wiring this conversion a real big pain or fairly simple???

[pur pony]

that was the hardest part for me as well. From what i remember, wiring is easy. All the color wires should be the same. I did do the XB high beam mod at the same time, which was also easy.

[skunkwork]

Thanks for the info. I just ordered a new headlamp assy & windscreen from harley....wasn`t as bad as i thought it would be.