mizu lowering kit

[atir]

I have a XB9SX and I am considering this lowering kit from SoloBuell.com
solobuell (http://www.solobuell.com/en/sb/buell-xb9sx/suspension/mizu/lowering-kit)
because I could use an inch lowering and fitting Scg susspension is too expensive.
What I worry about is how the handling will be affected? I was told that lowering only the back-end without front-end makes the handling much worse and that I should not do it. Does anybody has experience with this kit? Thanks guys.

[browland]

Why don't you put the low seat on it would only cost you 90 and it lowers the seat hight around an inch without affecting the suspension [confused]

[atir]

because it is hard like stone.
I have Select gel seat.

[wiznut]

Only lowering the back end would increase the rake, making steering slower....

[xtremelow]

Trading someone for the rear shock would be cheaper and IMO easier, unless you live in the Europe.

I would recommend slipping the forks the same amount you lower the rear to keep from raking it out like wiz said.