You should have a code stored, Download EcmDroid and get a Bluetooth dongle, It will show you the codes then you can go from there.
I have noticed it a few times now, but when I am riding the "check engine" light will light up, stay on for a few seconds, and then go off. It tends to happen when I am accelerating up through gears, and when I notice it, I usually let off and it goes off after a few seconds. Also, I have had it come on the same way while I am cruising between 4k and 5k rpm. I let off, and it goes away.... but I still want to know what it is about. Just over heating? Do I have a problem I should have looked at before it gets bad?
Also, it tends to happen in the first half hour or so of my ride, and I don't notice it as much when things are well warmed up.
I have plans to do an oil change soon, but if this requires some work, I will do it all at once.
Thanks for the advise!
You should have a code stored, Download EcmDroid and get a Bluetooth dongle, It will show you the codes then you can go from there.
AZmidget91 sells them on here. Send him a pm.
what dave mentioned above sound advice. you can also use the link below that i have provided to read your own stored trouble codes. in all probability you have stored codes and i suspect numbers 13 and 16. an intermittent CEL on 2009 models is almost always dirty/loose/broken battery terminal connections....and/or an O2 sensor on the way out.
http://www.buellxb.com/forum/showthr...ouble-Codes-08
Gotta agree with John as always. Probably a loose battery terminal.
And yes, I sell a Bluetooth dongle that allows you to use the Android app ECMDroid to read the historic codes. It also works with all the PC software.
PM me for Bluetooth info!
Facebook.com/BuellBluetooth
the code came up as low voltage... #16. I checked the battery and the positive terminal was a tiny bit loose, so I tightened it, and no more check engine lights.