Stator failure on AM commute

Buellxb Forum

Help Support Buellxb Forum:

Mesozoic

Mesozoic

Well-known member
Joined
Jul 4, 2008
Messages
385
Location
Tucson, AZ
It finally happened - a balmy 50*F morning ride and the battery indicator lights up and the voltage shows about 12.0V and dropping. Fortunately, was able to turn around and return to my garage to grab a different bike.

So what's the best recourse? I've heard obtain a Rick's stator and perhaps perform/obtain the oil cooling mod. I figured I might also entertain replacing the regulator for an upgrade while I'm at it. I could smell the stator when I parked the bike, not sure what else would've fried. Probably needs an oil change now.
 
I’d first verify whether the stator (and) or the regulator failed.

I don’t know how you would have smelled a failed stator since it’s inside the case. Regulator… sure

If you can get the EDM drilling done on the rotor, I’d recommend that first as (IMO) that is the root cause for charging issues on the 09-up 1125’s. Everything else is a band aid.

Maybe Buell can do it, since the 1125 and 1190 are “basically the same platform”.
 
What year is the bike? -08?-09? I have all sorts of 1125 parts, including a new stator., Harley "fix" harness. Not sure if the rotor is drilled. PM me if you need something.
 
The bike is a 2009 1125CR. I've not torn into it yet, but I will eventually. The bike has been running the Harley "fix" harness since I've owned it, I figured I'd deal with it one day, but have not had an excuse to until now.
 
Once you test to verify (EZ and in the manual), post up.
The VR is a standard piece and even has "Ducati" molded in the body. Thats a more common failure than a stator, even on these.

I used to hate the Harley 'fix' thinking it was a band-aid, and dismissing it's brilliance. If it was an OE feature, we'd be impressed:) When the charging system doesn't need to supply full amperage, it simply turns off one stator leg to keep the amp dump to a minimum and that keeps it cool.

A better solution would have been a MOSFET, non-shunt style of VR (and you can dive down that wormhole if you want) but either way, fix the issue, upgrade if you want... but Id leave the 'fix'.
 
Cooter said:
I used to hate the Harley 'fix' thinking it was a band-aid, and dismissing its brilliance. If it was an OE feature, we'd be impressed:) When the charging system doesn't need to supply full amperage, it simply turns off one stator leg to keep the amp dump to a minimum and that keeps it cool.
Click to expand...

Ok, McConaughey… I’ll give you that one
 
Screen Shot 2023-12-20 at 7.43.48 PM.png

Alright alright alright;)
 
Well, it's been a minute, but I finally got a motorcycle lift in my shop and decided to rack the 1125CR. Didn't take more than about 2-3 minutes of perusal and I found the 3-wire connector from the regulator has burned the insulation off of at least 2 of the leads to the point where one of them has completely detached from the Deutsch connector. So... at first glance it seems as if the regulator failed, but it could just be a symptom of some other component failure, right?

Sorry for the tiny image, the forum shrunk it and I don't see any options to make it larger. Actually, if you click on the image it does enlarge.
burntRegHarness.jpg

Ran the stator test as outlined in the electronic diagnostic manual. The resistance across all the stator sockets is exactly 0.21 Ohms for 1-2, 2-3 and 3-1. None of them are shorted to ground either, so I guess the stator is actually fine. This must be a regulator failure. I've read a few things about regulator replacement and with all the burned up connector housings, there's no reason to go with an OEM, but if anyone's got suggestions on series style (non-shunt) regs, please let me know.
 
Last edited:
I have used ROADSTERCYCLE.COM and the The Super Mosfet Kit FH020AA. He has a higher end one as well, SH847. I used the original harness and did not do the bypass.
 
Last edited:

Similar threads

J
Stumped (Oil leak, level, gas contamination)
Replies
12
Views
5K
34nineteen
34nineteen
Y
xb12r blowing low beams and intermittent CEL
2
Replies
23
Views
25K
young scooter
Y
M
XB misfire at constant RPM cruising (~3500 RPM).
2 3
Replies
47
Views
49K
njloco
N
U
Primary burning witches
Replies
4
Views
2K
Unreliable
U
V
Stator it may of happend to me...
Replies
11
Views
2K
vance580
V

Latest posts

Back
Top