Trying to confirm if the walker 932-11036 is in fact a good replacement for the oe Bosch po277.5aa on my 2009 xb12ss
Hey Cody: Tony compiled the below list many years ago and his info was always spot-on. I have never tried any of them to date but have a look. Did you ever source those front exhaust mount bushings you were looking for?
GM---25162693
NTK---21002
Airtex---553071
Bosch= 12014
Denso= 234-1001
Walker= 250-21001
SNG= SN1-15
Union Sangyo for OEM Toyota supplier----# C-170
I don't know about the Walker brand, but I have been chasing issues with the Bosch 12014 labelled by John above. I'm getting a OE Bosch unit to diagnose this issue soon.
Hey thanks John! I'll give those a look.Originally Posted by Barrett
And no I didn't ever track those exhaust bushings down. I admit I never actually called harley and asked. Twin motorcycles makes one, but kinda pricey with shipping so I made one. Just got the engine rotated down Tuesday night to swap on the new used header (thanks cooter) so be a bit before I see how well it'll work.
Had one exhaust stud back out and figured I should probably throw a new o2 in while I'm there so waiting on parts...
As far as the o2 sensors go the 932-11036 is listed on a couple websites as a direct replacement but I always like to check with the experts here. Will let everyone know what I get and how well it works 4 sure.
https://cv-performance.com/buell-o2-sensor-11036
First in search results on Google when looking up the oe unit
Sure thing Cody. Link below might help with correct O2 selection. The Bosch appears correct....the Walker # has a better choice. See if that helps.
The front mount bushing set part # is S0136.02A8---Factory shows NLA but Chaz has them if you're still in need.
https://aagaardmotofoundry.bigcartel...ngs-s0136-02a8
https://www.buellxb.com/forum/showth...confusion-help
Posting Permissions
Reply With Quote