• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. 9lbHammer

    Idle gets rough right when entering closed loop

    Following this thread. I experience rough idle until the bike is up to temp. I've never checked if it goes into closed loop. I have also done just about the same work: Plugs, TPS reset, and intake seals. Runs perfect when its warmed up.
  2. 9lbHammer

    Laser-cut custom heelguards

    I'm in if the price is right.
  3. 9lbHammer

    One of these things is not like the other!

    ;) Tig ole bitties!
  4. 9lbHammer

    One of these things is not like the other!

    [up][up]
  5. 9lbHammer

    One of these things is not like the other!

    I'm sure I'm not the only one to think Buells(for good or bad) stand out in a crowd. *Cough*I'm green with Envy*Cough*
  6. 9lbHammer

    Poor Front Braking/Glazed Rotor

    "This bed-in process and mileage will vary depending on pad type. Generally speaking, sintered pads will take longer to bed because they are harder, and may take up to 200-300 miles to bed in if the brakes are used lightly. Stopping (but not coming to a complete stop) from a series of...
  7. 9lbHammer

    Poor Front Braking/Glazed Rotor

    Soft brake handle ended up being a bubble in the line. I attached clear fuel line to the brake bleeder and watched a good 1/2inch bubble pass through the line. This explains why the brake suddenly felt soft as compared to slowly getting weak over time. Still doesn't explain how it got in the...
  8. 9lbHammer

    Poor Front Braking/Glazed Rotor

    EBR's response: "The combination of new pads, new rotor, and what looks like very light front brake use likely contributed to this situation. We would recommend different pads and a proper bed-in procedure to speed up the bed-in process. Thank you, EBR Customer Service"
  9. 9lbHammer

    Poor Front Braking/Glazed Rotor

    Flushed the front brake and the handle pressure returned. Still ordering new pads after the suggestions.
  10. 9lbHammer

    Poor Front Braking/Glazed Rotor

    [up]
  11. 9lbHammer

    Poor Front Braking/Glazed Rotor

    I'll grab a set of EBCs. I sent EBR an email for their preferred glaze removal process. I'll let you know what I hear.
  12. 9lbHammer

    Poor Front Braking/Glazed Rotor

    It has new hardware.
  13. 9lbHammer

    Poor Front Braking/Glazed Rotor

    Grabbed a bottle of DOT4 fluid at the cycle shop down the street. I'll flush the fluid tonight.
  14. 9lbHammer

    Poor Front Braking/Glazed Rotor

    After being a serial lurking on this forum for a while, I finally need some help in a few areas concerning the front brake. Bought a 2004 XB12S this spring with 15k. The bike had a warped front rotor that would only showed its ugly face when the rotor heated up so it was missed on the test...
  15. 9lbHammer

    WTB: Flyscreen Casting Module M0643.1ADYBQ

    I would agree if this was a "For Sale" thread.
  16. 9lbHammer

    WTB: Flyscreen Casting Module M0643.1ADYBQ

    Way, asshole move to hijack my thread. Slag, PM sent.
  17. 9lbHammer

    WTB: Flyscreen Casting Module M0643.1ADYBQ

    New to the forum/Buells. Looking to pickup a Casting Module M0643.1ADYBQ. Color doesn't matter as I plan to paint it. I will take both sides if you have them.
View older results
Back
Top