• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. B

    Bad rattle please help.....

    Sounds like you should look at your header bolts both front and rear. I have heard of nuts just vibrating loose, worst case could be broken header bolts. Hope I am way off/wrong.
  2. B

    New owners - Questions

    He is referring to the rubber boot over the clutch cable adjustment. I think he got his instruments mixed up. Its not a banjo but an accordion. People have been known to get water in the primary from water seeping in around this rubber boot.
  3. B

    Rt Side air scoop, shipping

    You could also check Buellster. That's where I got mine. It cost a little more than going thru Harley , but I had it in about 3 days. Well worth the extra money to me.
  4. B

    Exaust Cable - What to do with it after a Hawk exhaust upgrade?

    Sorry my bad memory. If you look under flags/switches, scroll down till you find "Active Muffler Control Configuration: Enable AMC Feature". Double click, and uncheck the setbox. Then save. As for the emulator, if you use the circuit shown in the ECMSPY manual, it will work. I built a...
  5. B

    Exaust Cable - What to do with it after a Hawk exhaust upgrade?

    It is almost as simple. Go ahead and install Tunerpro and get the xdf files. Go thru all the different parameters to get familiar with them to see where they are at. It is just uncheck an enable box for interactive exhaust. I don't have the program here at work or I would tell you exactly...
  6. B

    Exaust Cable - What to do with it after a Hawk exhaust upgrade?

    You can turn off the servo on an 08+ if you use ECMREAD and TunerPro. Or you can make or buy an emulator. I recommend the ECMREAD TunerPro. I did it on my 09 SCG.
  7. B

    loose mirrors

    Get rid of the factory mirrors. They are worthless trying to use. I couldn't make out anything that was behind me. My Napoleon bar end mirrors were probably one of the best mods I've made to my 09 SCG next to the Hawk muffler. They are actually usable. Bar ends can be gotten for various...
  8. B

    XB fan over-ride manual switch?

    You could just use ecmspy and modify your fan cut on temperatures so that it comes on at lower temperatures. This way there is nothing for you to remember to turn on or off.
  9. B

    blue exhaust pipes

    I cleaned mine with a scotch brite pad (green), just enough to get the blue off but did not shine them up. They turned back to a golden colored and after about 1000 miles have not turned blue again. I have heard if you shine them with the scotchbrite pad and WD-40, they will shine and then...
  10. B

    2009Scg with stress crack in airbox

    My 09 cherry bomb has the same line. I did not notice it until I painted my inner airbox white. It is symetrical and is probably a line left from factory mold.
  11. B

    Running without exhaust clamp

    Yeah, don't do it you will break header bolts, headers, or muffler. Just go to an industrial supply store, and aske for a heavy duty 6 inch (if I remember right) hose clamp. I picked up 2 when mine broke for $5.35 US. They had some that were identical, brand and all, but you have to remove...
  12. B

    problem starting up my toy

    From my experiences, you have a bad or weak battery. You can charge a battery, and it will hold the required voltage. But an electric motor is rated in watts, which is volts x amps. Your battery could have the required volts and not have the required amps. If the load (starter in this case)...
  13. B

    ECMSPY HELP

    You can't change the eeprom without physically removing the ecm and replacing it with a race ecm. What you can do though is copy and paste the maps from the race ecm to the stock ecm. Then your ecm will be like the race ecm, or close anyway.
  14. B

    Xtremelow & RTperformance ROCK!!

    That's what cycling is all about. Great job guys. Extreme and RT seem to both be stand up guys, helping out here where ever they can and on a personal basis to boot. WOW!!! [up][up][up]
  15. B

    major engine problem????? PLEASE HELP ME?

    If your sure you didn't overfill it I would check the crankcase vent valves. I'm not sure about the S1, but did ya'll do breather reroutes too? If so, your line or your breather could be clogged.
  16. B

    Flashing a Race Map to ALL Buells (08+ too)

    If yours is an '07 or an early early '08 you can just use ecmspy.
  17. B

    Flashing a Race Map to ALL Buells (08+ too)

    I'm not real familiar with the different kinds of firmware, but from the date listed with your firmware, you should be able to use the old ECMSPY. That would be much easier to use. That is not already a race ecm is it?
  18. B

    Flashing a Race Map to ALL Buells (08+ too)

    Go to xoptiinside.com and download and install the VCP driver if you don't already have it installed. Make sure you have the comport set to the right comport. Have you got your key in the on position and the kill switch in the run position? Just a few things to try, not sure what all you have.
  19. B

    ECMSPY can't load race map.Help please ?

    I don't understand what you are trying to say. You do still have the stock eeprom, all you changed was the maps that were in the file. Everything but your maps will still be the same. Do your front and rear fuel maps now match the race maps that you have? If so you have accomplished what you...
  20. B

    No More Sacrifices PLEASE

    Let me just start by saying I'm not trying to be an insensitive bastard. I just want to bring a little more awareness to everyones attention. As much as I appreciate all you destroying your great rides to make mine more of a collectors item, it just isn't necessary. I already enjoy my ride as...
Back
Top