• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. N

    rear wheel and belt problems!!!!!!!!

    Got the belt back on, what I had to do was pry the guard out just enough to slide the belt forward so I could disengage the secondary pulley then push the slack backwards so I could position the belt on the outsde of the wheel pulley, then push the belt forward to re-engage the secondary pulley...
  2. N

    rear wheel and belt problems!!!!!!!!

    tried that didnt work. the belt will not slip on unfortunately. Tried rotating the wheel clockwise and counter clockwise neither method seems to get the belt to "slide" on the pulley the Buell TSM says to remove the pulley..so I tried the "easy" way noted above first when tht didn't work, I...
  3. N

    rear wheel and belt problems!!!!!!!!

    the two bolts on the tensioner are off and it still wont move, I have no idea whats holding it on..
  4. N

    rear wheel and belt problems!!!!!!!!

    Hi everyone I had the rear berrings fails, and after getting the wheel off I now am having problems gettng back on! 1-the stupid belt gard will absolutely not come off the large 1/4 looking hex bolt simply will not turn.. and I cannot get a socket-hex on it as the brake lever switch with its...
  5. N

    Need to know what aftermarket turn signals can survive our Vtwins?

    Hey everyone As of today 3 of my 4 aftermarket turn signals have separated from the mounting shafts. Upon examining the failed turn signals it appears to an obvious case the turn signals not being made to survive the constant vibrations from the vtwin engines. So the logical question is, are...
  6. N

    Rear wheel bearing

    I know this is an old thread but just thought I would let everyone know this failure just happened to my 03 xb9r and low and behold it has the pre-recall bearings, time to call the dealer tomorrow for the orange bearings thanks Ned Williams
  7. N

    Dim low beam

    FYI just called my HD dealer they said the campaign was still "open" they are going to try to get it fulfilled for me if that means they do it for free great if it means they charge I will just pick up the parts and do it myself thanks for the help everyone Ned Williams
  8. N

    machined axle sliders are here!

    Interested how much for 30022
  9. N

    Dim low beam

    My xb9r has a low beam that looks bright at idle but on the road I have to run the highbeam to see. Just wondering if this is normal or perhaps the recall from 2010? Thanks Ned
  10. N

    Clutch slipping under load

    Hey everyone.. well my xb9r which is just now pushing 3800 miles started slipping under load in all 5 gears tonight while I was out riding..I consulted my manual and adjusted my the freeplay on my lever from what looked like .5mm of free play to about 2-3mm of free play doing this brought my...
  11. N

    flickering CEL and misfire at speed

    Hi everyone, the problem was 2 fold 1 the battery connections had become lose under the seat and 2 the battery itself was bad..new battery and tightend the connections and the problem was resolved thanks Ned Williams
  12. N

    flickering CEL and misfire at speed

    Hi Everyone, I just got my 03 XB9r 4 days ago and I have been riding her around the last few days to feel it out, but tonight a problem arose which I couldnt determine any obvious cause. while riding and three times after an upshift I would get a flickering CEL followed by a misfire if I pulled...
View older results
Back
Top