• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. O

    Data Link Connector - Need Help!

    Interesting article on that fan, the guy just wired in a manual switch for the fan instead of being controlled by the ecu. Has anyone wired in a cylinder head temp gauge on one of these?
  2. O

    Data Link Connector - Need Help!

    So I installed the Fan fuse and plugged in the fan, I was then able to clear the code (36). My bad. I also checked ALL the wires to the fan from the ECM and The fuse box for continuity and short to ground with a meter and all checked good. I was then able to run a FAN Test through ECM droid and...
  3. O

    Data Link Connector - Need Help!

    So I pulled the rear shock and fan to do some research and this is what I found: - Before I pulled the fan out the CEL remained constant and code 36 (fan) will not clear, fan tested fine before CEL was on constantly. - Yellow/Brown wire is sending clean power to the fan plug, checked with test...
  4. O

    Data Link Connector - Need Help!

    Yep, using the ECM droid. Live temps look normal for the minut or so I checked, but the CEL is on steady now and the fan code 36 will not clear. I should have some time this week to pull the rear shock and fan and look around. At first glance I didn't notice any oil leaking from the rocker...
  5. O

    Data Link Connector - Need Help!

    Hmm, not sure what the difference is between the Mono and the not, I just downloaded it onto my android device but it does not look like the screenshots you just sent. I have the option of looking at 4 different live parameters if that helps.
  6. O

    Data Link Connector - Need Help!

    Checked the fan parameters this morning and they all looked normal, fan on at 220C, off at 180C. Next step is to start it up and check temps while running which I didn't have time to do today, so hopefully tomorrow. There is a switch for "speed based" fan control on the ECM spy that I can enable...
  7. O

    Data Link Connector - Need Help!

    I haven't gotten in depth with the ECM spy yet, I just had time to plug it in, check the code and turn on the fan. I'd like to see what the parameters are for the fan, it seems to me they are set wrong. The Fan doesn't come on until I'm a mile or so down the road, and it ALWAYS shuts off as I am...
  8. O

    Data Link Connector - Need Help!

    I turned the fan on a few times via ECM SPY and it seemed to work fine. Though it didn't always sound great, the bearing maybe on its way out. If there was a wire open it would be an intermittent fault, which is exactly what I have. I'll check the connections and such when I get home. However...
  9. O

    Data Link Connector - Need Help!

    Got code 36, FAN. At this point the manual says I need a Break-out box, which I do not have. The CEL light has come on while riding, usually for just a minute or so. The other problem is that the FAM seems to run all the time while I am cruising down the highway but shuts off every time I come...
  10. O

    Data Link Connector - Need Help!

    YOU THE MAN!!!! I looked at all the wires in the area and nothing goes there. The connector and all the wires are completely hidden until you pop the panel off. When the manual said "Left side airflow panel" I assumed they meant the left side airflow panel, which moves air to the rear cylinder...
  11. O

    Data Link Connector - Need Help!

    The only place I haven't looked (yet) is behind the headlight, which according to the manual is only use for Firebolt models.
  12. O

    Data Link Connector - Need Help!

    This is driving me nuts. I have a 2008 Uly XT and my check engine light has come on periodically, so I went to check the codes. But to do that I need to find the Data Link Connector. According to my Wiring Diagnostics manual, it should be located under the left side air scoop. I removed the air...
  13. O

    Need a set of eyes in South Maryland for Uly purchase

    I've found a Uly in Maryland I'm planning to buy, but I live out of state and was hoping someone might be close by and can just go take a quick peek at it before I wire money over state lines. Anyone in South Maryland???
  14. O

    Built 2006 Buell XB12X Ulysses with luggage $4300

    What did you paint the engine with?
Back
Top