• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. N

    can't connect ECMspy while running (transmission timed out)

    Sorry, I misread your post... with the ignition on , switch on, bike not running, it can connect, disconnect, reconnect easily If the bike is running before I try to connect it doesn't work.
  2. N

    can't connect ECMspy while running (transmission timed out)

    I have tried both of those ideas. it works as it should in both cases.
  3. N

    can't connect ECMspy while running (transmission timed out)

    my opinion is that now that I've tried it with 2 completely independent cables, software, operating systems, that the problem is not related to my setup.
  4. N

    can't connect ECMspy while running (transmission timed out)

    so I made a bluetooth dongle and tried out ECMDroid. Unfortunately it works just like ECMspy. I am able to connect with ignition on and engine not running, but once started it disconnects and cannot reconnect. Does anyone know if there is a chance that there is an issue with my ECM? I read...
  5. N

    can't connect ECMspy while running (transmission timed out)

    that's interesting that ECMdroid disconnects when you start it. I measured the voltage with just the ignition on vs running. The 12V line follows battery voltage. I measure voltage from battery ground to the ground on the connector, and it remained very low ( a few mv) in both conditions. I...
  6. N

    can't connect ECMspy while running (transmission timed out)

    anyone else have any ideas I should try? I'd really like to get the bike tuned in without guessing and checking. That takes a long time! Thanks in advance!
  7. N

    can't connect ECMspy while running (transmission timed out)

    I ran a second ground cable from the battery to the ECM and communication port. that didn't help.
  8. N

    can't connect ECMspy while running (transmission timed out)

    I just tried selecting the com port again, it didn't help. I also tried the autodetect function and it said "failed to get com port". I also tried downloading the eeprom directly before starting. That didn't work either. I think I'm going to try running an extra ground wire to the cable...
  9. N

    can't connect ECMspy while running (transmission timed out)

    Unfortunately, 6 has not worked. This is one I have tried many times in as many configurations as I can think of. pressing the keys to disconnect, then press keys to connect again unplug/ replug cable at both ends along with an ECMspy restart etc.
  10. N

    can't connect ECMspy while running (transmission timed out)

    ECMspy works perfectly with ignition on and engine not running I have not found any functions that don't work when in this condition I recently swapped my wideband over to this bike, with the intention of doing some data logging. I quickly found out that no matter what I do, as soon as I start...
Back
Top