• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. C

    XB9S – running very roughly – tried various fixes – need some expert help!

    does it make a nice strong "normal" fuel priming sound when you first start it? Have you checked the plugs?
  2. C

    Project 2004 XB9S

    it's actually a pair of flood lights set up to look stock. sadly no beam pattern so aren't legal/fit for use on NZ roads. had two real issues. bad fuel pump and stuck closed injectors and a few missing bits haven't had to do the compliance for a vehicle here yet. but it seams simple enough...
  3. C

    Project 2004 XB9S

    Almost done, needs the headlight changed for a stock unit so I can register it to for road use here in NZ. but I took her for a short 40km ride on a private roads today,
  4. C

    Cooters clean out of XB parts

    yeah but getting it to NZ would cost way to much and to expensive for me with the NZD being rubbish vs USD
  5. C

    Cooters clean out of XB parts

    thanks, a size would help alot! I've given up looking for a stock exhaust, ordered a magnaflow 11148 via ebay,
  6. C

    Cooters clean out of XB parts

    are you willing to sell the rear 2 muffler straps on there own? and send them cheaply to New Zealand?
  7. C

    Another won't start thread

    didn't realize the PCV system was missing until recently, first post, link to a project you can see the exhaust is missing, and the airbox/filter I have, didn't want to piece it altogether to take it apart again, just a test start waiting on pcv valve gaskets to arrive, Thanks for the help
  8. C

    Another won't start thread

    Success, she started after an soaking the injectors overnight in kero, then spraying carb cleaner thru them while pulsing them with 12v till they gave an acceptable pattern, shes a little rough in the idle/rev department, but im guessing that its because its missing the airbox, exhaust and PCV...
  9. C

    Another won't start thread

    Buelltooth arrived, havent had time to do anything with the bike over xmas/new years, so havent checked the fuel pressure but have found a few moments to play with the buell tooth, there are no Current fault codes, and cleared the old codes, (BAS and Fuel pump) ran the injector test on both...
  10. C

    For sale: part from fender elminator kit

    sent you a PM
  11. C

    Another won't start thread

    maybe, will wait for the buelltooth and fuel pressure test before I remove them
  12. C

    Another won't start thread

    I didn't, but the importer will have to test it before sale
  13. C

    Another won't start thread

    Ok, will look into that as a possibility couldn't tell you how long it was sitting, jap import non runner , there was fuel in it about 4-5 Liters. Thanks everyone for the help so far,
  14. C

    Another won't start thread

    would this work? just connect the 8mm hose barb to a fuel pressure gauge?
  15. C

    Another won't start thread

    I did the replacement pump and metal filter, while I wait for the buell tooth I'll get the fuel pressure checked, what are these fittings called and what size are they? I'll pick up a universal kit
  16. C

    Another won't start thread

    work finished early, the earths either side of the battery have been inspected and cleaned, didn't really need it have also added a couple of new earth cables as per https://www.buellxb.com/forum/showthread.php?54706-Fixing-Earthing-Problems-Why-and-How also pulled the ecu and inspected, looks...
  17. C

    Another won't start thread

    yes. I bought a buelltooth yesterday .. so will be a couple weeks to get it.
  18. C

    Another won't start thread

    also is this yellow wire meant to be plugged into something?
  19. C

    Another won't start thread

    OK, error codes, 33 fuel pump and 44 BAS, old codes or current? 6.6volts measured on the BAS terminals the clutch switch seams to function as it should with very little resistance only a few ohms i'll have to leave the checking earths and ecu till the weekend
  20. C

    Another won't start thread

    thanks. it's a 2004 xb9s I'm located in the North. Auckland to be precise. OK I will try those things asap. thank you
Back
Top