• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. B

    charging issue

    "Charging harness" was that a recall issue? When I got the bike there was a harness piece installed from a dealer recall I believe. Should i take that out?
  2. B

    charging issue

    I agree! You have helped me in the past and I really appreciate it, THANKS!!
  3. B

    charging issue

    I will do that reset for the idle. Cleaned batt. terminals real well, replaced back on. It all seems to run ok now. I made a mistake in saying 12.5v, at idle I am getting 14.3v. I was going to put some heat sink paste on the volt reg. thinking that it could help?
  4. B

    charging issue

    Idle speed is a little high, 1200rpms what is normal? Dash has 12.5 volts. The day it was acting up it was around 100' out. Put the thing back together yesterday, about 80' out, bike acted normal. At the top where throttle cable adj. is, should i turn them in or out for adj. for the idle speed...
  5. B

    charging issue

    I changed the stator, rotor, voltage reg. on my 1125cr, rode 1k miles and batt. light comes on, rev it up a little it goes out. Rotor is an EBR, Rick's stator and Rick's hot shot voltage regulator. All work done by a certified Buell Tech. I just dont get it. ANY ideas will help. Thinking of...
  6. B

    Battery Replacement for 1125cr

    Got it out!!! I did take off the fairing. Much thanks for advice again.
  7. B

    Battery Replacement for 1125cr

    Thanks again to all!! I will go with all the info. I get here! Have a great winter!
  8. B

    Battery Replacement for 1125cr

    ANY ideas on how to get the battery in/out of my 1125cr? Crazy small space!! I could not find any videos out there. Can I use a lithium? Any help is welcomed, thanks
  9. B

    Stator/Rotor

    For Mesozoic or anyone looking to swap out stator/rotor. I talked with the EBR tech. last night and told them everything I did with the Rick's parts on the bike. EBR is saying the Hot Shot voltage reg. is hit or miss. They are seeing some of them creating a miss fire to the motor. They also are...
  10. B

    Stator/Rotor

    I sent back the rotor core to EBR for the core charge. They are going to let me know what the differences are when they get it. I am 100% sure it was an OEM I took off. I will let you know when i get more next week.
  11. B

    Stator/Rotor

    I just did a new stator/rotor upgrade. Rick's hot shot volt. reg., and stator. EBR upgraded rotor, new crank nut, etc. My stock rotor had a drill mark, but my new EBR had three, better for oil I assume. Just didn't expect the stock to have any at all. The stock volt. reg. has Ducati stamping on...
  12. B

    Best production year?

    I too bought a 09 CR, I checked with the dealer it was bought from and they did a recall for the voltage reg. (new wire harness for better ground). It only has 1,700 miles. I am concerned with the stator issue also. Should I ride till it fails, or just replace it now with better unit? All the...
  13. B

    butchcr

    THANKS for the info.!! Will do.
  14. B

    butchcr

    Tune Thanks! i will research these out. I see you on here a lot, witch one would be your advice on what to do?
  15. B

    butchcr

    I got a 1125cr and thinking of putting on the HMF exhaust kit. HMF say i don't have to anything other than bolt it in. I also want to run a KN air filter. Has anyone done this? Do i need to remap anything?
Back
Top