• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. B

    06 Uly TPS reset

    Got home early tonight and plugged in to see where it was at. Bike was cold/not running AFV - 94.2% (was set at 100% prior to riding because new fuel pump was installed) TPS - 1.06 volts & 6.2 degree angle (didn't want to upset the neighbors so I didn't start to verify warm idle rpm) Still...
  2. B

    06 Uly TPS reset

    Thank you, Sir! When I got home from work, I thew it back together and fired it up to go for a short ride. The initial idle was low during warm-up but I left it alone until it was warm enough to ride. Took off around the neighborhood at low speed/rpm to ease into mid rpm once it was fully warm...
  3. B

    06 Uly TPS reset

    Thanks for sticking with me Barrett! When the I was tracking my electrical short. I pulled all the ignition loads and tested them at both ends. The injectors were one of those, me being my careful-self marked front/back with paint marker on the plugs. Additionally, prior to removal and...
  4. B

    06 Uly TPS reset

    Checked the plugs, still look new Checked plug wires, all were securely fastened along with the coil plug Tried resetting the TPS again (20-times now) and set idle angle at 4.1, it ran rough for 5-10 seconds so I reset back to 5.5 degrees I'll try to attached a screen shot of the live data...
  5. B

    06 Uly TPS reset

    I was thinking it wouldn't hurt to double check the spark plug wire connections and make sure all were tight. Both cylinders are firing but maybe something is loose. I will also inspect the plugs to see if any are fouled. I understand the balance of the combustion triangle but with the...
  6. B

    06 Uly TPS reset

    I did perform a check on the intake seals during one of the garage start ups when it was running fine. At the time I was making sure the injector seals were set properly after having them cleaned/tested and thought I might as well test the intake seals too. All was good, no change in idle speed...
  7. B

    06 Uly TPS reset

    No luck, I'm doing exactly as ECMSpy directions, video and *service manual describe. *(service manual uses digital technician with software navigation differences) 1. Open up ECMSpy on Laptop 2. Connect Cable from bike to laptop 3. Turn ignition on then kill switch on 4. Select connect to ECM...
  8. B

    06 Uly TPS reset

    Great recommendation on pulling the headlight fuse & adding the charger during the process. I'm going to give it another try this afternoon and get back to you. I do not remember being prompted to click on a "yes tab". (Hopefully it's that simple)
  9. B

    06 Uly TPS reset

    Thanks for the reply! My steps were as follows: 1. Connect and fetch EEPROM data from ECM using ECMSpy 2. Click on the Execute button (this is to read live data) 3. Turned the idle adjuster CCW until the voltage stopped dropping then an addition 2-turns (filter base was removed to verify it was...
  10. B

    06 Uly TPS reset

    Long time Buell owner here (since 1999) but all carbureted tube-frames. Bought my first XB12X a month ago and brought it back to life. (sort-of) I rebuilt the fuel pump due to a deteriorated strainer and broken hose between the pump/pressure regulator. Had both fuel injectors cleaned and...
Back
Top