• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. A

    fuel pump will not stop running

    Got the Aagaard pump kit. Installed and everything works as it should, awesome!! The kit came with a Quantum regulator which I had already replaced, so I now have a spare. Just a bit of food for thought but the bad pump was a Quantum, not judging just reporting. Not sure what the take away from...
  2. A

    fuel pump will not stop running

    I did come across the Aagaard kit. And yes not cheap but complete, including the low fuel sender. I agree, if I'm going to be in there, again, use good parts for the long haul. Thanks for the feedback on that. Will let you know how it all works out.
  3. A

    fuel pump will not stop running

    Or do you have a better recommendation for a pump kit?
  4. A

    fuel pump will not stop running

    First off, I REALLY appreciate both of you taking the time to help me t/s this problem. I just looked at the harness and the pump side is the same as the picture and matches the bike side of the harness. The only difference, and don't think it makes any difference is the gray wire in the pump...
  5. A

    fuel pump will not stop running

    Also, Barrett, you mentioned something about a fuse box diode. I don't see anything like that in the prints or in the box itself. Can you tell me where that is located?
  6. A

    fuel pump will not stop running

    Well, I removed the loom from the bike side at the fuel pump connector to the black ecm conn. Found the bwn/y wire splice, it looked clean and secure. I did find some insulation and wire damage on the single wire before the splice, probably caused by me removing the loom. Repaired that damage...
  7. A

    fuel pump will not stop running

    Good info, this gives me a few more things to check. I will get back to this thread with what I find. Thanks
  8. A

    fuel pump will not stop running

    I confirmed constant power at the bike side of the harness connector for the gray pin, with kill and key off and all four relays and both ecm plugs removed. This kind of leads me to what I don't want to hear and you stated, "positive short somewhere in the wiring loom or relay system" ugh! Would...
  9. A

    fuel pump will not stop running

    While I had the pump out I inspected all wires and all looked fine. As a precaution I heat shrinked the wires with fuel resistant shrink. I checked ALL fuses, none blown. I swapped all four relays into different positions. I had purchased a repair kit that had the regulator, and replaced that...
  10. A

    fuel pump will not stop running

    I picked up a real nice 2009 Ulysses recently. PO said nothing about this issue, of course, but after t/s'ing why the battery kept going dead I found that the fuel pump does not turn off. Kill switch off, key removed, pump continues to run. Removing the pump fuse is the only thing will stop it...
Back
Top