• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. R

    rough rpm range

    It almost feels like a miss, no surge but if i holdmthe throttle pisition it is rough maybe a slight surge hard to tell more like a misfire, just rough.
  2. R

    Ulysses XT Questions / Concerns

    I might be interested in trading my Hawk mod muffler if your xt will fit my 07 Uly, mine had the muffler valve that hawk disabled and it now has dual exhaust tips. Send me a pm if interested.
  3. R

    rough rpm range

    My bike an 07 Uly will pull the front wheel in 2nd gear around 3k - 3500 rpm range with a twist of the wrist. My question is about the rough cruise in the 2500 to 3500 rpm range while cruising in this range regardless of the gear it seems ruff. I can run through the gears and rpm range and it...
  4. R

    Locking your bike outdoors

    I use a cycle shell also and a disc lock, the cycle shell is great, easy to use, low maint.
  5. R

    front fork leak

    A follow-up question, this leak must have started a few months back because the lower caliper mount was wet/dirty, also a little gusher with the shade tree repair. I might guess that maybe an eye dropper full of fluid may have been lost. Do I need to replenish the lost fluid? If so how is that done?
  6. R

    front fork leak

    Checked out the sealmate, read the reviews and instructions. Went to my desk to look for a business card to scrap. I found a hanging file folder tab, the kind you put the label in. I figured I could spread it open and cut it into 2 pieces that look a lot like a sealmate. Watched Sealmates video...
  7. R

    front fork leak

    While cleaning up the bike and preparing for riding season, I discovered my right front fork with oil on it . The real pisser is when I bought this bike last August, the PO showed me a receipt for the rebuild of both forks. I have 2 questions, 1. should I just rebuild the leaky bastard or do...
  8. R

    Exhaust actuator needed

    I have a used one, PM me.
  9. R

    Remounting Muffler

    No comment on replacing the front strap, my Uly has 48K miles on it with the original front strap. just make sure to clean both surfaces and the muffler is fully seated on the header pipe and the clamp is good and tight, recheck after first time out. Randy told me with the rear clamps in the...
  10. R

    ECMSpy update Error message

    Thanks Eric, and 5dro. I loaded the EEProm file from Randy and then went to the Maps tab and burned the front fuel map and then the rear fuel map. Everything appeared to work correctly a progress bar then a pop-up window telling me to togle the ignition. Took the bike for a test ride, after...
  11. R

    ECMSpy update Error message

    Hi All, I have been trying to update my ECM after an upgrade to a Hawk muffler and K&N air filter. I got updated maps from Randy. Here is a break down of what happens. 1. Fetch EEProm and save to my hard drive. 2. Load EEProm maps from Randy, it appears to load this with no problem 3. Click Burn...
  12. R

    Opinions? DIY or Shop

    As far as supporting the bike, I have used a step ladder to straddle the bike and then use ratchet binders over the ladder and through the frame.. You may need to play with the location of the ratchet binder to find the best setup. It is your call on the repair guy, I personnaly like to wrench...
  13. R

    Throttle Cable binding bad

    I had a similar experience after rotating my engine. When the engine was back in place the throttle would not fully close. Tried to do a TPS reset and found I could not zero the TPS. Long story short there was a cable tie binding the throttle cable, cut it and replaced with another but not so...
  14. R

    EEPROM?

    No they are files Randy sent me via email.
  15. R

    EEPROM?

    So I received "mounts" from Randy @ Hawk performance mufflers with my modified exhaust. While boning up on the Ecmspy tuner guide, I get the impression that these "mounts" are the same as the EEPROM. If that is the case then it should be no problem. Fetch and save the current EEPROM to multiple...
  16. R

    XB12R, will not stop starting.

    It sounds like grounding is not an issue if the starter motor is running. I would have to go with the solenoid sticking theory. I would also take apart the switch on the handle bars and ensure the switch returns to open when released, you should be able to look/feel and see this to confirm. I...
  17. R

    ECM part numbers and model compatability

    I do know that the spade between the black and grey plug is a ground. Not all years/replacement ECM's use it. My 07 Uly does have it and is a frequent source for intermitent troubleshooting. The part # on my 07 Uly is Y0152.3A8 07135. I am sure you will hear from more knowledgeable sources...
  18. R

    Hawk exhaust w/polished galvanized tip??

    Randy tells me the mod muffler sheds about 6lbs.
  19. R

    K&N filer cleaning

    No hair left to cut, the bourbon empties block out the compost pile, boots are polished and piss/vinegar is all I have left to flush with. But thanks for keeping it real.
  20. R

    K&N filer cleaning

    Not sure if this has already been covered but, what is an economical way to clean a K&N filer. Yes I am cheap but would also like an environmently friendly method.
Back
Top