• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. P

    Trouble finding neutral

    I’m digging into the primary. Does the clutch basket wear appear normal? There’s some slight gouging in the hub. The pushrod bearing seems good. Im pulling the basket to check the clutch basket bearing tomorrow. If that all checks out normal, im at a loss. The bike came with aftermarket...
  2. P

    Trouble finding neutral

    Ive tried all sorts of things to get this thing to shift into neutral. im going to send it to the aagaard moto foundry and see what they can do with this thing. Ill report back.
  3. P

    Trouble finding neutral

    Well guys, I’ve got the new clutch pack in and it still won’t find neutral. It definitely shifts better and the clutch pull is nice… but I still can’t get the bike into neutral while running.
  4. P

    Trouble finding neutral

    Haha Barrett, we’re both on the same page, but for the sake of being thorough I gave it one last college try. I’m ordering the clutch pack as we speak. I’ll update once I get it installed.
  5. P

    Trouble finding neutral

    I tried all of the above recommendations and there is no noticeable change in finding neutral. It shifts through the gears well so I doubt that its a bent shift fork or a shift drum issue. I would expect that if it was an internal transmission issue that it wouldn't go into neutral at all, or...
  6. P

    Trouble finding neutral

    thanks guys, i am confident that it is adjusted properly. He also mentioned it could be a bent shift fork, or "something not properly aligned in the trans". If it was a bent shift fork or something not being aligned correctly wouldn't that present a shifting problem all the time as opposed to...
  7. P

    Trouble finding neutral

    I did the first primary chain adjustment when it was hot, and the second time when it was cold. There was no noticeable difference.
  8. P

    Trouble finding neutral

    After a lengthy battle with a poor running engine, I’m now on to a smaller issue. I cant get the bike to shift into neutral once it’s warm. It shifts into neutral while cold until it warms up, and once it’s warm I can’t get it into neutral unless I shut the bike down. I’ve adjusted the primary...
  9. P

    Lean fouling the front plug xb12r?

    FINALLY. After a new set of injectors (I got lucky at my local HD dealer) its runs great. All of my values are back within spec. It seems I had a few problems contributing to my issues. The final tally of issues found were: Slight intake manifold leak in the front cylinder. Rear injector...
  10. P

    Lean fouling the front plug xb12r?

    Ok, wiring is fixed, new seals went in with no effect, but I have found my problem, my rear injector has a large leak and the spray pattern is way off. Now to try and find injectors… Anyone know what I can use instead of the buell oem? I’d prefer not to buy used
  11. P

    Lean fouling the front plug xb12r?

    Barret, that's EXACTLY the symptoms I'm having. This would be an absolute WIN if that's the case. This forum never disappoints! The next question is, obviously I don't want to fix those wires and not remedy the chafing issue. Are they easily rerouted, or should I just shield them better with...
  12. P

    Lean fouling the front plug xb12r?

    Awesome info barret, thanks dude! Is the color coding the same for the 08+ bikes?
  13. P

    Lean fouling the front plug xb12r?

    An update, I rotated the engine down to take care of a rocker box leak and to throw some new intake seals in. The old intake seals looked ok, but since I’m in there, i figured I’d replace them with a newer James gasket set. I pulled the TB and it is filthy inside and out. While I was looking...
  14. P

    Lean fouling the front plug xb12r?

    Ok, I logged a 25 mile ride today. I was able to get the file into megalog viewer so I can see it. Im learning as I go with this and needless to say I don't know that I'm looking at, or looking for with this data. After some reading it makes sense what you’re saying about the ecm leaning...
  15. P

    Lean fouling the front plug xb12r?

    Sounds good, I’m assuming I should set the afv and ego parameters back to normal before data logging?
  16. P

    Lean fouling the front plug xb12r?

    Well, I started with the TB and tps. I haven’t found any issues there. All the sensors are functioning as they should. There are no intake leaks. I’m testing the fuel system tomorrow, while I’m waiting for the gauge to do so, I figured it would be prudent to make sure the previous owner of the...
  17. P

    Lean fouling the front plug xb12r?

    I pulled my maps to see if you guys could spot anything that seems out of order with it. It seems that the idle area is richer than other race maps, and there are two rows of empty cells. This is an EBR ecm. I'm still striking out with tracing down the cause of my lean condition. I'm testing the...
  18. P

    Lean fouling the front plug xb12r?

    It’s a 2008. I’ve done tps resets successfully a few times with no change in the low idle problems.
  19. P

    Lean fouling the front plug xb12r?

    it’s not ideal to shotgun parts, I get that, but without a shop that’ll touch it, and lacking the knowledge myself, I gotta try something. I’d prefer to do things one at a time so I’m not wasting cash, but that complete throttle body really is a steal, and I couldn’t find the individual parts...
  20. P

    Lean fouling the front plug xb12r?

    awesome. I'll swap the o2 sensor this week and report back. I was able to find a complete throttle body assembly with new injectors, new sensors, and seals for a decent enough price. If the o2 sensor doesn't fix the issue, should I move to swap all of those things out at once with the new TB...
Back
Top