• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Search results

Buellxb Forum

Help Support Buellxb Forum:

  1. R

    WHAT PLUGS DO YOU RUN?

    it wasnt the plugs, i ended up upping the slow jet from a 42 to a 45. seems to have done it.
  2. R

    Pinging

    ok, I yanked the 42 and replaced it with a 45. I played with the mixture for a few rides and it runs better than ever and zero detonation/preignition. So there it is, a 190 main jet and a 45 slow jet and it idles perfect and pulls hard as hell. BIG IMPROVEMENT and no ping! still planning on...
  3. R

    Pinging

  4. R

    Pinging

    More on the subject, after dropping my gear ratio with the 23/55 sprocket combo, I see that the bike doesnt need to be at wide open throttle to acheive top speed .. meaning that I run out of gear before I run out of throttle, at full throttle I WILL over rev the engine in top gear. Therefore, I...
  5. R

    Pinging

    ok 190 jet in and also went to an 8 from a 7 plug in case the plug was too hot...still pings but with less intensity per occurance. It will not do it under full wide open throttle, makes me wonder if my mid jet is the issue and its leaning out during the transition to the main jet.If not, the...
  6. R

    WHAT PLUGS DO YOU RUN?

    i think ngk heat range 8/9 is agood idea and suspect my pinging issue is from the 7 im running. i jetted up from a 180 to a 190 and it still pings si i swapped in a pair of 8 plugs. find out tomorrow.
  7. R

    Pinging

    Im swapping out the 180 jet for the next size up, that might be enough to deal with it. I'll go from there.
  8. R

    WHAT PLUGS DO YOU RUN?

    What plug do you run? I use ngk iridium 6046 or ngk 4179..
  9. R

    98 m2

    Super clean but considering trading for a crotch rocket. 750 or bigger and ugly is ok, I have a paint shop. I just miss going fast fast.
  10. R

    New to forum

    A guy offered me an 02 gsxr 750 for trade today, I'm actually considering it because when I run out of gears at 100 I miss the 165mph thing. wish I was rich enough to own them both.
  11. R

    Pinging

    98 cv carb, not sure if I can adjust the needle a little higher or if I just need the jet kit.
  12. R

    Pinging

    ok, I rode it and it really seems to only occur at high vacume and hi rpm, like the timing advances too far or something. definately related to throttle position though because at 95 mph it will start to ping and if i pump the throttle it might stop completely for minute.
  13. R

    Pinging

    oops, to finish my sentance from above....I just pulled the plugs and they appear clean but light and a bit chalky looking. This is a lean condition yes? The pic really doesnt capture the dry whitish look too well, anyway, any thoughts on my next step? Obviously if adding the oil stops the...
  14. R

    Pinging

    I have noticed recently that this thing is pinging at (guessing no tach) 4.5k+ when UNDER LOAD OR JUST BEGINNING TO EASE OFF THE THROTTLE. At first I thought Lifter? Valvetrain? But then I thought maybe a tank of crappy gas. I filled it with sunoco 112 and it seemed to get better, but not...
  15. R

    proud new m2 owner that needs help

    CXheck your primary slack, easy and can make it feel a lot tighter if its sloppy, you want 1/2 in. play
  16. R

    New to forum

  17. R

    New to forum

    look on my facebook wall photos. I dont have a program to shrink my images to post.
  18. R

    New to forum

    I traded a paint job and 1000- for a worn out cyclone and this winter finally broke down and did a frame up makeover on it. Converted it to chain/sprocket, new bushings, new top end gaskets, complete repaint. I like this thing and am happy to find a forum, a lot of my questions might have been...
Back
Top