08+ ECMSPY question
- Thread starter PonyXB12
- Start date
Help Support Buellxb Forum:
Pony, I'm in Chicago. I believe you have to have Tunerpro RT to datalog, but someone else might know for sure.
With Tunerpro free, you can burn and manipulate tables/cells (apparently more complicated on 08+ because of the table orientation). I have one bike with a dyno'd ECM (PO) and another stock - the difference is front wheel off the ground noticeable. If my tax return ever gets here, I'm going to the tuniversity.
With Tunerpro free, you can burn and manipulate tables/cells (apparently more complicated on 08+ because of the table orientation). I have one bike with a dyno'd ECM (PO) and another stock - the difference is front wheel off the ground noticeable. If my tax return ever gets here, I'm going to the tuniversity.
sparky300
Well-known member
Pony, please keep us posted. I too have had an interest in data logging/remapping my '08 Scg but have had no real definitive answer after reading nearly 100's of threads, of which almost all dealt with pre '08 bikes. Btw, TunerPro RT is a free, (read: donation optional) program.
From their website:
"Both TunerPro and TunerPro RT are free. TunerPro RT has a "nag" window at startup for unregistered users, but the software is feature-complete even without registration and the software never expires (many shareware packages do). A $30 "donation" will allow you register TunerPro RT, removing the nag window. Registration is not required."
From their website:
"Both TunerPro and TunerPro RT are free. TunerPro RT has a "nag" window at startup for unregistered users, but the software is feature-complete even without registration and the software never expires (many shareware packages do). A $30 "donation" will allow you register TunerPro RT, removing the nag window. Registration is not required."
sparky- just saw this- http://www.buellxb.com/Buell-XB-Forum/Do-It-Yourself-Buell-Mods/Tunerpro-
