1125 FreeSpirit TailSection brackets-ForSale

[texasroadranger]

This is the TailSection 'lift brackets' that lift the 1125 tailsection about 2" higher to give an 'aggressive look' to the bike. I want $200 for the kit.

This is what it looks like:

Stock height

Lifted Height

Email me at [email protected] or PM me here on forum.

 

[texasroadranger]

These are some more pics of the tail lift brackets. I have the fiberglass tank cover and solo tailsection so you really can't see the gaps the stock tank cover and stock tail will have. If you look at the front edge of the stock seat and see that it almost touches the frame on the stock height, the tail lift will create a small gap for the tank cover and the tail section cover. I hope this answers some questions for some. Thanks for the interest. Michael

 

[1badtitan90]

Is this for just the brackets or the everything..

 

[texasroadranger]

All I have are brackets. They are pictured at beginning of post. The small 'C shaped' one mounts on the 'stator side' of the tailsection subframe side and the bigger '2-piece' bracket mounts on the 'clutch side' of the tailsection subframe side.

 

[poinographer]

Is this mostly an appearance mod, or is it supposed to improve performance/handling? It would shift some weight forward, but also raise the CoG.

 

[texasroadranger]

I think appearence mostly to get rid of the 'drag ass look' from the tail to stop looking like its too low.

 

[texasroadranger]

Those of you Engineers out there could get these brackets, engineer them to bolt on the XB-S tail sections, mass-produce them to those who want an XB tail on their 1125 frames, and make some BOOKOO $$$$$$!!

 

[texasroadranger]

You can go from THIS!!!!

To THIS!!!

 

[texasroadranger]

Still have the brackets available and was asking $200 but Im open to offers. Let me know,thanks. ML