1125r exhaust removal?

[stuuk]

Hi Guys

I have a stealth slipon to fit to my 1125r.

How do I remove the oem can?
I cant seem to find all the mounting bolts

Thanks

Stu

 

[Bossanova]

There are two bolts up by the oil cooler and I think there is at least one back under the shifter area. Save the hardware from the oil cooler - you might have to re-use it.

 

[d_adams]

3 bolts up front for the oil cooler and bracket. 5mm and 6mm allen bolts. 13mm nut on the left bolt only, craftsman open end wrench will work fine. 2 more 6mm allen bolts at the rear, one is through the pulley. Loosen the clamps next. Also loosen the right foot peg bracket, 2 bolts. Exhaust should almost fall off the bike at that point.

 

[Cronce1125R]

how many exhausts do you think you've taken off and put back on dean

 

[d_adams]

Entirely too freakin many.