after all my testing

[migs16]

today ive been running test and test riding and more tests. to figure out why my bike has been riding terrible as in bogging and choppy. every time i pull the trouble codes it shows 24/25. which is ignition coil shorting.

I tested everything and pulled my plugs which were fine untill finally i pulled the coil and found it to have a resistance 13.5k ohms when it needs to be 5.5k ohms.

and the connector terminals were 1.5 ohms when it needs to be .5 ohm. So am i right that i need to get a new coil???

 

[crxtasy169]

Yes sir that is pretty far out of spec I would replace the wires to, they are less than ten dollars a piece.

 

[anrkizm95]

if its not with in specs replace it.

 

[migs16]

ok good. i just need to ask around.
thanks again