After crash help.....

[toofast7782]

[confused]
So I dumped my 05 db12r today into some gravel around a left corner at about 40.. I broke the fairing stay rashes the plastic. Took out turn signal. Broke all shit linkage. And toasted my mirror. Luckily the frame pucks took most of the dammage. It seems nothing else is broken but when I try to fire it up it does the whole guAge buzz thing but when I hit the starter nothing . There is no damage in the starter or the right side at all . Anny suggestions. Lean angle thing? ECM looks fine just broke the bottom left leg of fairing stay. Any help would rule thanx...
One and if anyone has a fairing stay or shift linkage let me know

 

[Theycallmecrash]

Under air box there is a main ground, check that, and check if where the mount goes to the head isnt broken

 

[fishxb12]

Sent you a pm about a shift linkage.

 

[user_deleted]

Lean angle thing?

called BAS or bank angle sensor. small plastic unit approx. same size as the relays in fusebox. normally under seat or your tail section. marked "UP" on top. you'll know if it is defective as bike will not start.

 

[Enemy Zero]

called BAS or bank angle sensor. small plastic unit approx. same size as the relays in fusebox. normally under seat or your tail section. marked "UP" on top. you'll know if it is defective as bike will not start.

Isn't it under the front fairing on the R models? Just wondering because I could swear when I helped a friend with his 04 12R, it was right up front almost between the headlights.

 

[Enemy Zero]

I can't edit the above post but I found a pic of it on the R models,

 

[toofast7782]

Thanx a bunch guys I actualy figured out that it was still in 4th gear and so i wouldn't crank. My shift linkage is broken and I had to use some pliers to grab the shift rod and get it back to nutral. Started right up. So time to order some parts.....

 

[user_deleted]

Isn't it under the front fairing on the R models?

ya go it is. see pic posted by enemy.